Hubs That Accept Tie Downs ??

muttguru · Unread post by **muttguru** » August 1st, 2016, 4:57 pm

rickf wrote:AND!!!!!!!!!!!!!!!!!! You do not address the fact that they are selling non-threaded hubs, NOS, right now. And are they 151/A1 hubs or are they A2 hubs?

Rick....where are these? The picture of the one on ebay is in fact threaded. As is the one that EP copied from the internet...below......you can see the threads if you zoom in.
ken

http://s1082.photobucket.com/user/arush ... i.jpg.html

Bart1015 · Unread post by **Bart1015** » August 1st, 2016, 6:21 pm

I wonder if the m416 trailer wheel caps would fit? If you can measure the size, I can compare it to my trailer caps.

Brett

Surveyor · Unread post by **Surveyor** » August 1st, 2016, 6:40 pm

Never noticed these before and they were staring me in the face in Doyle's book. It has quite a few pictures of this type on the xm's and early straight m151's. Last one shown that still had them in a pic was # 2C1344...

Unread post by **rickf** » August 1st, 2016, 7:21 pm

muttguru wrote:
rickf wrote:AND!!!!!!!!!!!!!!!!!! You do not address the fact that they are selling non-threaded hubs, NOS, right now. And are they 151/A1 hubs or are they A2 hubs?
Rick....where are these? The picture of the one on ebay is in fact threaded. As is the one that EP copied from the internet...below......you can see the threads if you zoom in.
ken

http://s1082.photobucket.com/user/arush ... i.jpg.html

These are the part numbers for the ones with no threads given by Elvis.

"Well, I guess they are Spindles - P/N 11644854 (2530-00-176-3337). They are clearly the versions without the threads. Is that the only difference between the Marine version and the Army version?? If so, then these must be the Marine version. Maybe I should just find the Marine lifting eyes??? All the pics of Marine MUTTs the eyes look the same from the outside???

Okay - so does anyone have any Marine specific lifting eyes ???"

Elvis Presley · Unread post by **Elvis Presley** » August 1st, 2016, 9:38 pm

I missed that part rickf - where did you see the non-threaded versions for sale??

Elvis Presley · Unread post by **Elvis Presley** » August 1st, 2016, 9:41 pm

I see what happened. It was just a seller on EBay that dug stuff up on MUTT hubs / spindles probably without knowing there was a cool story behind it!! Thanks Guru!! I'm sure a '66 should have the lifting eyes so I'll go that way for now. Maybe I have another Ford in my future???

Have a nice day everyone!!!!

Elvis Presley · Unread post by **Elvis Presley** » August 2nd, 2016, 8:46 am

I'm a bit thick - but rickf is correct!!! RAPCOPARTS has 7 of them for sale on Ebay...
(No threads)

Hubs That Accept Tie Downs ??

Re: Hubs That Accept Tie Downs ??

Re: Hubs That Accept Tie Downs ??

Re: Hubs That Accept Tie Downs ??

Re: Hubs That Accept Tie Downs ??

Re: Hubs That Accept Tie Downs ??

Re: Hubs That Accept Tie Downs ??

Re: Hubs That Accept Tie Downs ??