Body repair parts wanted

Need something for your Mutt? Let us know!

Moderators: rickf, moose53, Mr. Recovery, raymond

Post Reply
matt506
Corporal
Corporal
Posts: 35
Joined: August 2nd, 2009, 10:18 pm

Body repair parts wanted

Post by matt506 » November 19th, 2017, 10:13 pm

I am collecting body repair parts as I tear the MUTT down. Two items I need are not being reproduced. Does anybody have a junker they could cut the following pieces out?
First piece bubba carved out is the lower portion of the throttle linkage hole in the fire wall carving down into the lower panel under the dash.
The second is just a small chunk of ribbing from the underside of the hood which is in ok condition but is of the three rib kind making it kinda rare from what I have heard. Will gladly compensate for any ones troubles and shipping. I have pics but not sure how to get them on here. they can be seen on the G503 sight under wanted.
Thanks for any help. Matt

User avatar
Vzike
Command Sergeant Major
Command Sergeant Major
Posts: 654
Joined: December 27th, 2013, 4:05 pm
Location: Singer Island, Florida

Re: Body repair parts wanted

Post by Vzike » November 20th, 2017, 9:00 am

Hi Matt,

I have a section with the throttle linkage hole. PM your email address or email me direct and I'll send you a picture.

Vin

rickf
General
General
Posts: 16016
Joined: November 26th, 2007, 1:28 pm
Location: Pemberton, NJ.

Re: Body repair parts wanted

Post by rickf » November 20th, 2017, 10:57 am

I am pretty sure the ribs are all the same beit two or three rib, you could get a rib from a two rib hood for a replacement. Later A2's also have the three rib hoods.
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone

matt506
Corporal
Corporal
Posts: 35
Joined: August 2nd, 2009, 10:18 pm

Re: Body repair parts wanted

Post by matt506 » November 21st, 2017, 7:49 pm

Rick so true but I do not have a donor hood. Thats why I ask if some one could cut any bit out of a shot hood.

rickf
General
General
Posts: 16016
Joined: November 26th, 2007, 1:28 pm
Location: Pemberton, NJ.

Re: Body repair parts wanted

Post by rickf » November 21st, 2017, 7:58 pm

Where are you located?
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone

halftracknut
Colonel
Colonel
Posts: 1937
Joined: December 11th, 2007, 2:28 pm

Re: Body repair parts wanted

Post by halftracknut » November 23rd, 2017, 12:55 pm

Much easier to pick up a good used hood and a lot less work...use old hood for patching material...
slowest mutt east of the missippi..

matt506
Corporal
Corporal
Posts: 35
Joined: August 2nd, 2009, 10:18 pm

Re: Body repair parts wanted

Post by matt506 » December 10th, 2017, 11:07 pm

Rickf,
I am up near Milwaukee Wi. zip is 53021. matt

matt506
Corporal
Corporal
Posts: 35
Joined: August 2nd, 2009, 10:18 pm

Re: Body repair parts wanted

Post by matt506 » December 10th, 2017, 11:11 pm

Half track you may be right. Shipping on these though is a bitch.

Mark
Lt. Colonel
Lt. Colonel
Posts: 1245
Joined: September 19th, 2009, 11:33 pm

Re: Body repair parts wanted

Post by Mark » December 10th, 2017, 11:48 pm

There are used hoods on eBay for $75, S&H is $158.53
mark


1968 m274A5
1960 m151
1981 m151A2
1964 m416
1971 m416

Post Reply