Gauges

Need something for your Mutt? Let us know!

Moderators: rickf, raymond, Mr. Recovery

agwrangler
Staff Sergeant
Staff Sergeant
Posts: 128
Joined: September 7th, 2016, 11:21 pm
Location: Pinche Texas

Gauges

Unread post by agwrangler » July 9th, 2018, 2:45 pm

Hey fellers.
I am looking for 2 gauges. I have tried all of the dealers, and looked through my entire pile. I am needing the gauges with the black wire coiled under the needle. I am needing the Oil pressure and the fuel gauge of that type.
Any chance any of you have one or both sitting around in New Old Stock condition? I will pay, or can trade NOS or used parts.
Please let me know. This is the LAST thing i am lacking.
Thanks a lot!
Sean

Fil Bonica
Brigadier General
Brigadier General
Posts: 2607
Joined: December 9th, 2007, 10:49 am
Location: ~ Heaven ~

Re: Gauges

Unread post by Fil Bonica » July 9th, 2018, 10:08 pm

The fuel gauged I have are covered around the coil so it’s not seen.
Any use?

Fil Bonica
K1ABW

agwrangler
Staff Sergeant
Staff Sergeant
Posts: 128
Joined: September 7th, 2016, 11:21 pm
Location: Pinche Texas

Re: Gauges

Unread post by agwrangler » July 10th, 2018, 1:05 pm

No comprendo, Fil.......
What do you mean covered?

Fil Bonica
Brigadier General
Brigadier General
Posts: 2607
Joined: December 9th, 2007, 10:49 am
Location: ~ Heaven ~

Re: Gauges

Unread post by Fil Bonica » July 10th, 2018, 3:55 pm

The gauge needle pivots through a hole in the front plate so no coil shows.

Fil Bonica
K1ABW

User avatar
rickf
General
General
Posts: 19738
Joined: November 26th, 2007, 1:28 pm
Location: Pemberton, NJ.

Re: Gauges

Unread post by rickf » July 10th, 2018, 7:08 pm

I have seen the gauges he is talking about where the coil is exposed but it was always on old radio equipment.
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone

agwrangler
Staff Sergeant
Staff Sergeant
Posts: 128
Joined: September 7th, 2016, 11:21 pm
Location: Pinche Texas

Re: Gauges

Unread post by agwrangler » July 12th, 2018, 9:13 pm

I now have all of them except the fuel gauge. If any of you fools have one laying around, please let me know!
Sean

SturmTyger380
Sergeant First Class
Sergeant First Class
Posts: 299
Joined: October 1st, 2015, 2:31 pm
Location: Upstate SC

Re: Gauges

Unread post by SturmTyger380 » July 13th, 2018, 7:28 am

Let me look in my pile. I remember seeing one. It might have the coil showing but I remember seeing a copper color. Alan
45' MB, ??' MBT, 47' CJ2A, 48' CJ2A,
51' M38 #1, 51' M38 #2, 51' M100,
52' M37, ??' M101A1 (1st Gulf War Vet),
53' M38A1, 53' M211, 65' M151A1, 67' M416,
MVPA #31724

User avatar
Surveyor
Terminal
Posts: 1092
Joined: November 13th, 2015, 3:56 pm
Location: Cajun Country

Re: Gauges

Unread post by Surveyor » July 13th, 2018, 1:11 pm

Is there a certain time frame or model these were put on? Why the difference?
1960 M151 Run #1
"There is one nut on a M151 that is very difficult to remove....." - K8icu
"She ain't a Cadillac and she ain't a Rolls, But there ain't nothin' wrong with the radio" - Aaron Tippin
Image

User avatar
rickf
General
General
Posts: 19738
Joined: November 26th, 2007, 1:28 pm
Location: Pemberton, NJ.

Re: Gauges

Unread post by rickf » July 13th, 2018, 3:00 pm

Calling us fools is certain to get you a good result. :roll: I know I am really motivated to run out and check my stash now.
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone

agwrangler
Staff Sergeant
Staff Sergeant
Posts: 128
Joined: September 7th, 2016, 11:21 pm
Location: Pinche Texas

Re: Gauges

Unread post by agwrangler » July 14th, 2018, 9:46 am

Haha, we could be called far worse than fools! I am proud to be a fool!

SturmTyger380
Sergeant First Class
Sergeant First Class
Posts: 299
Joined: October 1st, 2015, 2:31 pm
Location: Upstate SC

Re: Gauges

Unread post by SturmTyger380 » July 16th, 2018, 10:11 am

Dang it! I was trying to remember to dig though my gauges on Sat and got busy, then on Sunday too. Too many distractions. :|
45' MB, ??' MBT, 47' CJ2A, 48' CJ2A,
51' M38 #1, 51' M38 #2, 51' M100,
52' M37, ??' M101A1 (1st Gulf War Vet),
53' M38A1, 53' M211, 65' M151A1, 67' M416,
MVPA #31724

agwrangler
Staff Sergeant
Staff Sergeant
Posts: 128
Joined: September 7th, 2016, 11:21 pm
Location: Pinche Texas

Re: Gauges

Unread post by agwrangler » July 16th, 2018, 10:14 am

Sturm, if you get a chance, let me know. Thats my last thing needed for this stinky MUTT.
Thanks.

SturmTyger380
Sergeant First Class
Sergeant First Class
Posts: 299
Joined: October 1st, 2015, 2:31 pm
Location: Upstate SC

Re: Gauges

Unread post by SturmTyger380 » July 17th, 2018, 10:04 am

I tried to send an e-mail but it didn't work so here are some photos of what I have. I found an oil and temp gauge that have the coil but the fuel one does not.

Image

Image
45' MB, ??' MBT, 47' CJ2A, 48' CJ2A,
51' M38 #1, 51' M38 #2, 51' M100,
52' M37, ??' M101A1 (1st Gulf War Vet),
53' M38A1, 53' M211, 65' M151A1, 67' M416,
MVPA #31724

agwrangler
Staff Sergeant
Staff Sergeant
Posts: 128
Joined: September 7th, 2016, 11:21 pm
Location: Pinche Texas

Re: Gauges

Unread post by agwrangler » July 17th, 2018, 10:19 am

Poop. Ok, well thanks for checking, i really do appreciate it.

SturmTyger380
Sergeant First Class
Sergeant First Class
Posts: 299
Joined: October 1st, 2015, 2:31 pm
Location: Upstate SC

Re: Gauges

Unread post by SturmTyger380 » July 17th, 2018, 10:57 am

45' MB, ??' MBT, 47' CJ2A, 48' CJ2A,
51' M38 #1, 51' M38 #2, 51' M100,
52' M37, ??' M101A1 (1st Gulf War Vet),
53' M38A1, 53' M211, 65' M151A1, 67' M416,
MVPA #31724

Post Reply