Need Some More Stuff For the MUTT !!!!

[Elvis Presley]

First, thanks for looking!!!!

I just picked up an A1 windshield for my MUTT - removing the last big A2 part...

So here's what I'm looking for:

Windshield rubber - need to put some new glass in the frame and need a new seal.
Passenger's side vacuum motor, attaching stuff and wiper arm (used is cool with me!)
Vacuum switch for the wiper system
Lots of vacuum tubing and clamps (I guess) to stick it together

Decon bottle ??? I have the bracket, but not the bottle....

The 3-way strap to hold a Jerry can on the bumperette of a A1 - used would be great - the new ones on Ebay look like they came from Taiwan...

Some rear brake cylinders, flex lines and mounting hardware for a 1966 A1. Not sure which size cylinders it had, as they are no longer there....

The triangular piece of metal on the floor between the front seats. I remember TNJ Murray used to have them, but their website is so screwed up, I couldn't find the part if I tried...

That about does it for now. If you have anything on the list, please send me a PM and we'll go from there!!!

Thanks!!

[rickf]

For that floor panel you want to contact CMD. They are advertisers here and post on here for body panels. I will try to find a link for you. Found it, look about four posts down on page 14 and you will see the trans tunnel cover he is making.

Here is one link http://g838.org/viewtopic.php?f=2&t=7334

[TKledzik]

For that floor panel you want to contact CMD. They are advertisers here and post on here for body panels. I will try to find a link for you. Found it, look about four posts down on page 14 and you will see the trans tunnel cover he is making.

Here is one link http://g838.org/viewtopic.php?f=2&t=7334

Just bought the same part fro CMD- real nice part. Very clean and well made.

[Bucolic]

Just a note, the windshield wiper motors are interchangeable, the one on the passenger side just gets mounted up-side down. And you don't need any clamps, just get 7/32 rubber hose. It will just push on. I'd send a picture of my dash with the hoses all installed but I can't find any way of attaching a picture.
OK, I went and looked at the pictures I have of my dash and yes, you will need some clamps. To hold the hose to the dash, not to the vacuum motors.
Email me and I'll send you a couple of pictures.
SAA.3840@verizon.net