Door Center Rods

Need something for your Mutt? Let us know!

Moderators: rickf, raymond, Mr. Recovery

Post Reply
TrueXena
Master Sergeant
Master Sergeant
Posts: 395
Joined: May 26th, 2008, 2:36 am
Location: Ohio
Contact:

Door Center Rods

Unread post by TrueXena » August 3rd, 2008, 9:28 pm

I need 2 door center rods. Anyone got some they can/want to part with?
Later dayz,
TrueXena
Image
1966 M151A1 - Daily Driver
1964 M151A1 - Restoring
1977 M151A2 - Restoring
1978 M416
1952 M37 - Restoring

k8icu
1st Sergeant
1st Sergeant
Posts: 468
Joined: December 8th, 2007, 11:13 pm
Location: Cleveland Ohio
Contact:

Re: Door Center Rods

Unread post by k8icu » August 3rd, 2008, 9:51 pm

Didn't I give you some with all the other stuff? If I didn't I mean to. Your talking about the rod that goes from the bows to the body so that the side curtain can wrap around it right? I'll look in the garage this week and see if they are hiding in a corner some place...
There is one nut on a M151 that is very difficult to remove.....

TrueXena
Master Sergeant
Master Sergeant
Posts: 395
Joined: May 26th, 2008, 2:36 am
Location: Ohio
Contact:

Re: Door Center Rods

Unread post by TrueXena » August 3rd, 2008, 9:56 pm

yup, those are what I'm lookin' for. And before you ask, yes, I did look in the pile of 'extras' that you gave us. They are not to be found. If you have them still, that would be great if you could send, I'll pay for shipping.
Later dayz,
TrueXena
Image
1966 M151A1 - Daily Driver
1964 M151A1 - Restoring
1977 M151A2 - Restoring
1978 M416
1952 M37 - Restoring

User avatar
Rainman
Brigadier General
Brigadier General
Posts: 2398
Joined: November 28th, 2007, 12:32 am

Re: Door Center Rods

Unread post by Rainman » August 3rd, 2008, 10:24 pm

So K8icu,

It seems your holding out on M151 parts again huh. LOL Watch him TX, he's a tricky one. :D
Do you need them before Hallsville? I'll see if I have any spares laying around too. If I do they'd
be a might rusty.

Rainman
M151 World Land Speed Record Holder

TrueXena
Master Sergeant
Master Sergeant
Posts: 395
Joined: May 26th, 2008, 2:36 am
Location: Ohio
Contact:

Re: Door Center Rods

Unread post by TrueXena » August 3rd, 2008, 11:06 pm

I guess I don't need them till I get them. LOL

If you can find a set laying around that you are not using, you can bring them to Hallsville. I've got a couple of 2 liters of Coke that will fix that rust on them. The door frames are currently getting treated with a famous coke bath right now. ;)
Later dayz,
TrueXena
Image
1966 M151A1 - Daily Driver
1964 M151A1 - Restoring
1977 M151A2 - Restoring
1978 M416
1952 M37 - Restoring

k8icu
1st Sergeant
1st Sergeant
Posts: 468
Joined: December 8th, 2007, 11:13 pm
Location: Cleveland Ohio
Contact:

Re: Door Center Rods

Unread post by k8icu » August 4th, 2008, 10:19 pm

Dang nabbit Ray I had a slew of parts and I sold you the extras. I kept the parts that I thought I might need because I had a 151. You got the doubles and extras I wasn't holding anything from you so knock it off! Besided the friggen door rods would have been needed if I wanted to put the doors and side curtains on my jeep so they weren't extra! When I sold the jeep to TX those were suppose to go with it...but the little buggers went and hid in the garage...or at least I hope they are hiding in the garage and didn't hide in the old house before I moved...that would be bad...
There is one nut on a M151 that is very difficult to remove.....

TrueXena
Master Sergeant
Master Sergeant
Posts: 395
Joined: May 26th, 2008, 2:36 am
Location: Ohio
Contact:

Re: Door Center Rods

Unread post by TrueXena » August 4th, 2008, 11:55 pm

LOL, they are probably hiding under a workbench or something. I'm just gonna need them before winter sets in. Hubby plans on freezing his butt in that thing, but I figure he could freeze less if the doors and side curtains are on. ;)
Later dayz,
TrueXena
Image
1966 M151A1 - Daily Driver
1964 M151A1 - Restoring
1977 M151A2 - Restoring
1978 M416
1952 M37 - Restoring

User avatar
Rainman
Brigadier General
Brigadier General
Posts: 2398
Joined: November 28th, 2007, 12:32 am

Re: Door Center Rods

Unread post by Rainman » August 5th, 2008, 9:56 am

Hey TX,

Look around in that M151 real close and see if K8icu left his sense of humor in there. :D

Rainman
M151 World Land Speed Record Holder

TrueXena
Master Sergeant
Master Sergeant
Posts: 395
Joined: May 26th, 2008, 2:36 am
Location: Ohio
Contact:

Re: Door Center Rods

Unread post by TrueXena » August 5th, 2008, 10:15 am

I looked in the Mutt, not there. Maybe in the boxes of parts he left? I'll check when it stops raining. ;) :D
Later dayz,
TrueXena
Image
1966 M151A1 - Daily Driver
1964 M151A1 - Restoring
1977 M151A2 - Restoring
1978 M416
1952 M37 - Restoring

k8icu
1st Sergeant
1st Sergeant
Posts: 468
Joined: December 8th, 2007, 11:13 pm
Location: Cleveland Ohio
Contact:

Re: Door Center Rods

Unread post by k8icu » August 5th, 2008, 10:22 pm

You got rain? We got bubkiss!

Ray I have a sense of humor...but the joke got old and a little offensive.
There is one nut on a M151 that is very difficult to remove.....

TrueXena
Master Sergeant
Master Sergeant
Posts: 395
Joined: May 26th, 2008, 2:36 am
Location: Ohio
Contact:

Re: Door Center Rods

Unread post by TrueXena » August 5th, 2008, 11:01 pm

Yup, it rained in buckets early morning. Spose to rain tonight too, we shall see. I figure it will rain as long as I want to 'treat' the canvas seats. When I don't want to treat them, then it will stop raining. Of course this is also the week that Hubby promised NOT to drive the MUTT to work, so I could do all these little things to it. And of course with the rain I've only been able to do two things out of the 20 I've planned! :D That's the way the cookie crumbles I spose.
Later dayz,
TrueXena
Image
1966 M151A1 - Daily Driver
1964 M151A1 - Restoring
1977 M151A2 - Restoring
1978 M416
1952 M37 - Restoring

Post Reply