Hot floor?
Moderators: rickf, raymond, Mr. Recovery
Hot floor?
Gents!
Success!! Engine runs and wheels turn in gear (although the transmission is still leaking a bit)....
Question for you all: the floor between the front seats gets way hot...is this normal?
Thanks! Pics coming soon!
kk
Success!! Engine runs and wheels turn in gear (although the transmission is still leaking a bit)....
Question for you all: the floor between the front seats gets way hot...is this normal?
Thanks! Pics coming soon!
kk
Re: Hot floor?
There is supposed to be a heat shield between the muffler and the floor but all the shield is is a piece of curved sheet metal and it is usually rusty so heat is transferred from the muffler to the shield and then from that to the floor. I have melted plastic bags on that section of floor. Great for keeping coffee hot in cool weather though.
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
Re: Hot floor?
1960 M151 Run #1
"There is one nut on a M151 that is very difficult to remove....." - K8icu
"She ain't a Cadillac and she ain't a Rolls, But there ain't nothin' wrong with the radio" - Aaron Tippin
![Image](https://i.postimg.cc/cLjJH4bM/stk2.jpg)
"There is one nut on a M151 that is very difficult to remove....." - K8icu
"She ain't a Cadillac and she ain't a Rolls, But there ain't nothin' wrong with the radio" - Aaron Tippin
![Image](https://i.postimg.cc/cLjJH4bM/stk2.jpg)
Re: Hot floor?
Anything you wrap it with will trap moisture and cause it to rot. The best thing to do is to sandblast it and then paint the muffler side of it silver or white to reflect the heat. You could also paint it with ceramic pain, don't know how well that would work in that instance but it works on headers.
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
Re: Hot floor?
There are plenty of racing / street rodder products that can help mitigate the transfer of heat in tight places. Something like this, perhaps? (though I would recommend a mechanical connection to the underside of floor pan rather than relying solely upon the adhesive) This particular product says it requires one inch of clearance to be effective. Of course, excessive idling is going to reduce the airflow in that area to nearly nothing so the heat issue can be greatly reduced by giving some careful consideration to how you are operating the vehicle as well.
https://www.summitracing.com/parts/hsp-721202/overview/
Do a little web surfing and I'm sure you'll come up with a variety of similar products that will do the job.
I often drive mine to do grocery shopping and put plastic grocery bags on the area between the seat. Haven't melted a bag yet but it's hard on the groceries.
Helpful hint: I also have two modern molle canteen pouches attached to the front corners of the front seat frames, co-located just behind the transmission hump so that their bottoms rest on the floorpan between the seats. I tuck the covers inside and use these as soft holders for soda cans or bottles and whatever else might need kept readily at hand. They work great and there seems to be little or no appreciable heat transfer up in that area.
https://www.summitracing.com/parts/hsp-721202/overview/
Do a little web surfing and I'm sure you'll come up with a variety of similar products that will do the job.
I often drive mine to do grocery shopping and put plastic grocery bags on the area between the seat. Haven't melted a bag yet but it's hard on the groceries.
Helpful hint: I also have two modern molle canteen pouches attached to the front corners of the front seat frames, co-located just behind the transmission hump so that their bottoms rest on the floorpan between the seats. I tuck the covers inside and use these as soft holders for soda cans or bottles and whatever else might need kept readily at hand. They work great and there seems to be little or no appreciable heat transfer up in that area.
Re: Hot floor?
I took a truck bed liner and cut it to fit my floor. Had it left over after putting a spray liner in the truck. Took care of the heat and protects the floor from rocks that get caught in my boots. Easy enough to get out also. I also put a large ammo can between the seats for a arm rest and to put a Styrofoam cooler inside for water and ice.
Glynn
If you don't stand behind our troops, please feel free to stand in front of them
MVPA #29026
USMCR 1976-1979
KY ARNG 1979-1996 (retired)
KSP (retired)
PGR member
1960 Ford M151
1966 Stevens M416
If you don't stand behind our troops, please feel free to stand in front of them
MVPA #29026
USMCR 1976-1979
KY ARNG 1979-1996 (retired)
KSP (retired)
PGR member
1960 Ford M151
1966 Stevens M416
-
- 1st Lieutenant
- Posts: 911
- Joined: December 19th, 2011, 12:31 pm
- Location: eustis fl
Re: Hot floor?
I'm in fl, that's my heater ! in the winter!
![Very Happy :D](./images/smilies/icon_biggrin.gif)
![Very Happy :D](./images/smilies/icon_biggrin.gif)
![Very Happy :D](./images/smilies/icon_biggrin.gif)
![Very Happy :D](./images/smilies/icon_biggrin.gif)
![Very Happy :D](./images/smilies/icon_biggrin.gif)
![Very Happy :D](./images/smilies/icon_biggrin.gif)
![Very Happy :D](./images/smilies/icon_biggrin.gif)
1967 M-35-a2-D SOLD
1973 M151A2
M151 A1-SOLD
196? franken MUTT
M1oo trailer-sold
1963 M151-sold
1968 M416 trailer
1988 998 Humvee-4 man
1994 998 Humvee-up armored
1973 M151A2
M151 A1-SOLD
196? franken MUTT
M1oo trailer-sold
1963 M151-sold
1968 M416 trailer
1988 998 Humvee-4 man
1994 998 Humvee-up armored