Pedal Assembly clutch rod
Moderators: rickf, raymond, Mr. Recovery
Pedal Assembly clutch rod
My clutch rod from the under the dash broke, so I thought I'll have to remove the pedal assembly R&R the rod, so here I am gazing at it, then I notice where the rod hooks to the tang, that it is bolted to the pedal assembly. Bingo!! easy fix..remove bolt, tang comes off to attach the clutch rod.On the 151 ten years ago I fixed it the same way, but since then I have caught dementia so my memory is lacking.
mark
1968 m274A5
1960 m151
1981 m151A2
1964 m416
1971 m416
1968 m274A5
1960 m151
1981 m151A2
1964 m416
1971 m416
Re: Pedal Assembly clutch rod
Which begs the question.... WHY did it break?
Re: Pedal Assembly clutch rod
I don't know, the curved end broke, had to get it towed home 8 miles,
mark
1968 m274A5
1960 m151
1981 m151A2
1964 m416
1971 m416
1968 m274A5
1960 m151
1981 m151A2
1964 m416
1971 m416
Re: Pedal Assembly clutch rod
That would have been from a LOT of wear between the rod and the Z-bar arm. Didn't you have clutch adjustment issues a while back?
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone