My 1967 M151A1 restoration project
Moderators: rickf, raymond, Mr. Recovery
My 1967 M151A1 restoration project
Hello everyone, my brother found this M151A1 sitting next to an old shop out in New Hampshire. After talking with the owner and seeing the pics he sent me I bought what I thought was a running mutt with a little rust. If I can get the pics to load up you will see this was far from a little rust. I have dubbed it the Flinstone mobile. I picked it up for a good price and he threw in three spare take motors, 2 A1's and a A2. I also got a spare tranny one spare wheel and the unibody repair kit. I love this forum as it helps give hope and ideas of what I will have some day. So any input would be greatly appreciated. I hope to get the pics loaded up here shortly. The guy I bought this from has a couple M725's and a M43 if any of you know some interested I those.
Dan M.
1968 M151A1
Dan M.
1968 M151A1
Last edited by CaBoy72 on October 25th, 2013, 5:29 am, edited 1 time in total.
My M151A1 restoration project
Dan M.
1968 M151A1
Re: My M151A1 restoration project
Welcome to the forum, Dan. That is one rough mutt but I've seen guys (on here) start out with worse. Noticed the wasp's nest next to the air cleaner... . I had one inside mine when it arrived.They entered via the fording snorkle & drowned in the oil bath inside. Pretty effective "bug zapper". Good luck with the resto!
Matt
Matt
My M151A1 restoration project
Thanks Matt, yeah I am pretty good at fabrication and body work. I have been a diesel mechanic and novice body man for years. I just did an M35A2 with a matching M105A1 trailer that project took me a year. This project will require a lot more time the the truck did. But I'm still excited to get this done. I am in the process of reinforcing the rear of the jeep so I can put it up on a rotisserie.
Dan M.
1968 M151A1
Dan M.
1968 M151A1
Re: My M151A1 restoration project
I don't want to be the wet blanket here but the fact that you have no rear suspension left that is basically a parts donor. There are no repair parts made for that section and to fabricate it is going to take more time and resource than it is worth. What you need to do now is find a better body to use as a foundation for the build. The very first thing to check on a M-151 is the underneath, the unibody rails are only sheet metal and in states where salt is used in the winter these vehicles will be toast.
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
My M151A1 restoration project
I have been looking for another body but have not had any luck yet. I have even tried to find another rear section that I could cut and weld in place. Again with no luck. I don't have the finances to buy a whole new body just way out of my wallet resources. I have heard of a guy here local that has two mutts one he uses for parts so I have been trying to track him down. I just hate to part the whole thing out and punt.
Dan M.
1968 M151A1
Dan M.
1968 M151A1
- Mr. Recovery
- Brigadier General
- Posts: 2895
- Joined: December 5th, 2007, 9:03 pm
- Location: New Port Richey, Fl.
- Contact:
Re: My M151A1 restoration project
I have a rear section out of an old project of mine that "may" be of use to you, where are you located?? I am thinking by your handle "CaBoy72" that you are in Ca.?? I'll have to take a few photos tomorrow and post them if you want.
1960 M151 Run 1
1963 M151 Willys DoD 10-63 in Baltimore
1989 Alley Cat. "work in Progress"
NRA Life Member
American Legion Post 275 Fl
US Army 6 years 2nd Armored Cavalry Bindlach Germany
Colorado Army Nat. Guard 5 years
Md Air Guard 15 years active duty on C-130's
1963 M151 Willys DoD 10-63 in Baltimore
1989 Alley Cat. "work in Progress"
NRA Life Member
American Legion Post 275 Fl
US Army 6 years 2nd Armored Cavalry Bindlach Germany
Colorado Army Nat. Guard 5 years
Md Air Guard 15 years active duty on C-130's
My M151A1 restoration project
Yes I live in Anderson Ca. But my brother drives truck coast to coast. Please post pick and pm me with price.
Dan M.
1968 M151A1
Dan M.
1968 M151A1
- Mr. Recovery
- Brigadier General
- Posts: 2895
- Joined: December 5th, 2007, 9:03 pm
- Location: New Port Richey, Fl.
- Contact:
Re: My M151A1 restoration project
OK, The section is out back and I'll get to it tomorrow and take some photos, if you want it, it is yours for cost of shipping or your brother can visit me in Fl. and pick it up.
1960 M151 Run 1
1963 M151 Willys DoD 10-63 in Baltimore
1989 Alley Cat. "work in Progress"
NRA Life Member
American Legion Post 275 Fl
US Army 6 years 2nd Armored Cavalry Bindlach Germany
Colorado Army Nat. Guard 5 years
Md Air Guard 15 years active duty on C-130's
1963 M151 Willys DoD 10-63 in Baltimore
1989 Alley Cat. "work in Progress"
NRA Life Member
American Legion Post 275 Fl
US Army 6 years 2nd Armored Cavalry Bindlach Germany
Colorado Army Nat. Guard 5 years
Md Air Guard 15 years active duty on C-130's
-
- Brigadier General
- Posts: 2086
- Joined: July 20th, 2009, 11:49 pm
- Location: Va. Beach & NC Outer Banks
Re: My M151A1 restoration project
Welcome Dan, best place to be for a mutt lover! Be patient and you will find what you need to do it right and within your budget.
1976 M151A2 4 Color Cammo Mutt, aquired August 09
1976 or 7? M151A2 "Miss Sandy" Driver, aquired May 2010
Former owner M151A2 "Miss Saigon" Vietnam Rescue Sold Sept 09
Fond appreciation for the M151 Breed!!
1976 or 7? M151A2 "Miss Sandy" Driver, aquired May 2010
Former owner M151A2 "Miss Saigon" Vietnam Rescue Sold Sept 09
Fond appreciation for the M151 Breed!!
My M151A1 restoration project
Thanks Dan and thank you csmith. I have always wanted one since my dad took me for a ride in one when I was 7 or 8. I love old military vehicles. I am pretty resourceful when it comes to getting parts. But this project is a whole new elephant for me.
Dan M.
1968 M151A1
Dan M.
1968 M151A1
-
- Brigadier General
- Posts: 2506
- Joined: October 1st, 2010, 12:19 am
- Location: El Dorado, Arkansas
Re: My M151A1 restoration project
Welcome Dan, You will for sure need that underbody kit. I'm with Rick, it will need a lot of work to fix that rear suspension, but it can be done. As mentioned earlier, there are a lot of talented guys on this site that will walk you right thru it. Another body will be hard to find, if u did it would be in the same condition. Hambone
Re: My M151A1 restoration project
I know that M151. I was looking at it this summer, not to buy but I was hanging out with the former owner and looking over his collection.
-
- Brigadier General
- Posts: 2068
- Joined: December 11th, 2007, 2:28 pm
Re: My M151A1 restoration project
She looks good to me! I say go for it and post plenty of pictures...you may be suprised many members here will have cheap or free parts to help you along.
slowest mutt east of the missippi..
- Mr. Recovery
- Brigadier General
- Posts: 2895
- Joined: December 5th, 2007, 9:03 pm
- Location: New Port Richey, Fl.
- Contact:
Re: My M151A1 restoration project
Photos of what I have, I will cut off the extra parts you won't need.
[/URLURL=http://s195.photobucket.com/user/Mr_Recovery/media/HOME-PC/Pictures/dan-2beers-2_zps6d3a82dc.jpg.h][tml]
[/URLURL=http://s195.photobucket.com/user/Mr_Recovery/media/HOME-PC/Pictures/dan-2beers-2_zps6d3a82dc.jpg.h][tml]
1960 M151 Run 1
1963 M151 Willys DoD 10-63 in Baltimore
1989 Alley Cat. "work in Progress"
NRA Life Member
American Legion Post 275 Fl
US Army 6 years 2nd Armored Cavalry Bindlach Germany
Colorado Army Nat. Guard 5 years
Md Air Guard 15 years active duty on C-130's
1963 M151 Willys DoD 10-63 in Baltimore
1989 Alley Cat. "work in Progress"
NRA Life Member
American Legion Post 275 Fl
US Army 6 years 2nd Armored Cavalry Bindlach Germany
Colorado Army Nat. Guard 5 years
Md Air Guard 15 years active duty on C-130's