Goma larga del cristal parabrisas

This is the place to get help with technical matters concerning your M151 jeep

Moderators: rickf, moose53, Mr. Recovery, raymond

Post Reply
rupert's
Corporal
Corporal
Posts: 39
Joined: March 29th, 2020, 7:10 am

Goma larga del cristal parabrisas

Post by rupert's » September 4th, 2020, 5:15 pm

Hello again everyone! Let's see if anyone knows if this is normal ...
A few days ago I bought a rubber for the A2 glass, this afternoon I tried to put it on but I have a piece of rubber left over, my question is what should I do?
The short one because the usual is that the rubbers that are bought for these crystals are long
Or should I return this part because it is wrong?

Thank you all very much for lending a hand! without this forum I don't know how I would solve many doubts!
Attachments
goma cristal.jpg

rickf
General
General
Posts: 17189
Joined: November 26th, 2007, 1:28 pm
Location: Pemberton, NJ.

Re: Goma larga del cristal parabrisas

Post by rickf » September 4th, 2020, 6:17 pm

I would say that is the wrong gasket. If you had to cut it then it would have come with a cut already in it. That should fit very snug on the glass.
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone

199th mp
Captain
Captain
Posts: 1045
Joined: January 18th, 2010, 2:59 pm

Re: Goma larga del cristal parabrisas

Post by 199th mp » September 4th, 2020, 9:47 pm

are you certain the glass is cut to the correct size? if the glass is right, then rick is correct. it's absolutely the wrong gasket.

rupert's
Corporal
Corporal
Posts: 39
Joined: March 29th, 2020, 7:10 am

Re: Goma larga del cristal parabrisas

Post by rupert's » September 5th, 2020, 2:25 am

I am completely sure, the glass is original, it came with the mutt, I have removed it for restoration ...
I'll have to ask the store for change. Thanks guys!

rupert's
Corporal
Corporal
Posts: 39
Joined: March 29th, 2020, 7:10 am

Re: Goma larga del cristal parabrisas

Post by rupert's » September 14th, 2020, 5:55 am

In case someone helps, in the end I had to cut the rubber, it was a standard rubber, I cut it, so that it was very just and then I glued it with glass silicone.
By the way very very hard to put the glass, it goes with a lot of pressure ... Greetings to all

rickf
General
General
Posts: 17189
Joined: November 26th, 2007, 1:28 pm
Location: Pemberton, NJ.

Re: Goma larga del cristal parabrisas

Post by rickf » September 14th, 2020, 9:44 am

Glad to see you got it finished. Keep am eye on the spot you cut because rubber shrinks, it is going to open up over the years. You will just need to be sure you keep it caulked to prevent water entry and rust.
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone

Post Reply