Axle U joints

This is the place to get help with technical matters concerning your M151 jeep

Moderators: rickf, Mr. Recovery, raymond, moose53

Re: Axle U joints

Sponsor

Sponsor
 

Re: Axle U joints

Postby Surveyor » June 12th, 2018, 8:50 pm

Just finished measuring one i got awhile back from one of the bigger parts suppliers for m151 parts.

Cap o.d. is 1.063 on all 4.
Distance from end to end is 3.22
Outside ring to outside ring is 2.6

These dimensions match to standard chart dimensions such given by moog.

Here is the kicker. The supplier ground off the model number.... has to be out in the wild for cheaper I would think.
1960 M151 Run #1 (working on it)
"She ain't a Cadillac and she ain't a Rolls, But there ain't nothin' wrong with the radio" - Aaron Tippin
Image Image Image
User avatar
Surveyor
Sergeant Major
Sergeant Major
 
3 years of membership3 years of membership3 years of membership
 
Posts: 571
Joined: November 13th, 2015, 2:56 pm
Location: LA

Re: Axle U joints

Postby m3a1 » June 12th, 2018, 11:20 pm

rickf wrote:I have one of those but got so frustrated with the battery going dead all the time I just went back to the El Manuel one.


Batteries are cheap and this came with a spare battery. This is not a high end one but it checks out against known measurements.
m3a1
Colonel
Colonel
 
4 years of membership4 years of membership4 years of membership4 years of membership
 
Posts: 1430
Joined: August 7th, 2014, 5:36 pm

Re: Axle U joints

Postby Surveyor » June 13th, 2018, 3:07 pm

I know they all pretty much look the same but the ones I have look the most like Moog by the pics available online. Sent email through Moog contact form. Will see if we get a response.
1960 M151 Run #1 (working on it)
"She ain't a Cadillac and she ain't a Rolls, But there ain't nothin' wrong with the radio" - Aaron Tippin
Image Image Image
User avatar
Surveyor
Sergeant Major
Sergeant Major
 
3 years of membership3 years of membership3 years of membership
 
Posts: 571
Joined: November 13th, 2015, 2:56 pm
Location: LA

Previous

Return to Technical Discussion

Who is online

Users browsing this forum: No registered users and 4 guests

Customization by G838.org