Brake Light Pressure Switch

This is the place to get help with technical matters concerning your M151 jeep

Moderators: rickf, raymond, Mr. Recovery

Post Reply
kmam
Sergeant Major
Sergeant Major
Posts: 524
Joined: June 6th, 2015, 7:39 am
Location: Kuranda, Far North Queensland, Australia

Brake Light Pressure Switch

Unread post by kmam » March 25th, 2017, 4:26 pm

T J Murray lists a brake light pressure switch for the M151. Are these a standard option to replace the mechanical switch mounted to the pedal? If si, where are they connected to the brake kine?

Howard
Howard

Daimler Ferret Mk 1/2
AM General M151A2
Austin Champ
Top
Hambone
Brigadier General
Brigadier General
Posts: 2506
Joined: October 1st, 2010, 12:19 am
Location: El Dorado, Arkansas

Re: Brake Light Pressure Switch

Unread post by Hambone » March 25th, 2017, 4:46 pm

The mechanical switch was on the A2, the pressure switch was on the A1, it hooked up at the master cylinder.
Top
kmam
Sergeant Major
Sergeant Major
Posts: 524
Joined: June 6th, 2015, 7:39 am
Location: Kuranda, Far North Queensland, Australia

Re: Brake Light Pressure Switch

Unread post by kmam » March 25th, 2017, 4:57 pm

Ah, that explains it, thanks. A backward step?

Howard
Howard

Daimler Ferret Mk 1/2
AM General M151A2
Austin Champ
Top
Post Reply

Return to “Technical Discussion”