Wheel spindle nut size?

This is the place to get help with technical matters concerning your M151 jeep

Moderators: rickf, raymond, Mr. Recovery

Post Reply
Challenger2
Corporal
Corporal
Posts: 43
Joined: August 10th, 2015, 10:31 am

Wheel spindle nut size?

Unread post by Challenger2 » May 27th, 2017, 10:00 am

Hi guys,
I am in the shed (in the United Kingdom) tearing down the front wheel/suspension on my 77/78 M151A2, to restore and renew components where necessary - but what size is the wheel spindle adjuster nut (the castellated one with cotter pin) please, so I can get the required socket and get going again?
Thanks,
:roll:
Top
User avatar
fergrn37
Staff Sergeant
Staff Sergeant
Posts: 198
Joined: March 18th, 2016, 12:05 am
Location: SEOK

Re: Wheel spindle nut size?

Unread post by fergrn37 » May 27th, 2017, 10:12 am

1.25 inch - 32mm
Some people are too busy knowing it all to ever learn anything
Top
Challenger2
Corporal
Corporal
Posts: 43
Joined: August 10th, 2015, 10:31 am

Re: Wheel spindle nut size?

Unread post by Challenger2 » May 28th, 2017, 4:00 am

Thanks fergrn.
Enjoy the rest of the weekend.
:D
Top
Post Reply

Return to “Technical Discussion”