Question about Windscreen Whiper Linkage

[on-to-berlin]

I am in the final stages of my restoring my A2. I have bough a new Windscreen but the linkage was missing. I was lucky to get a used windscreen with the linkage. So I will switch the linkage and install it together with the NOS wiper motor.
My question is: on the long linkage part there seems to be a slotted hole to which the actual wiper is attached. To me it seems that there is a lot of free play. Is this normal? Or is there to be some sort of special nut etc?

[Fil Bonica]

There is a set of nylon bushings that are neded.

Fil Bonica

[on-to-berlin]

Thanks! I found them in the meanwhile also in the partsbook.

[ErEyal]

There is a set of nylon bushings that are neded.

Fil Bonica

Very correct as always Fil

I found a set on Ebay, but i preferred making new ones at a local workshop together with some new pins for the linkage .

just opened that panel today for some rattle issues , will take a pic for you tomorrow.

Eyal

[m75]

Looks like a replacement cowl gasket might be in order also.