Zenith 13660B

This is the place to get help with technical matters concerning your M151 jeep

Moderators: rickf, raymond, Mr. Recovery

User avatar
rickf
General
General
Posts: 19738
Joined: November 26th, 2007, 1:28 pm
Location: Pemberton, NJ.

Re: Zenith 13660B

Unread post by rickf » August 15th, 2017, 2:45 pm

It sounds like it may have sucked up a piece of debris from the tank. Take it out of the line and tap it on a piece of wood on the inlet side and see if any dirt comes out and then try it again and see if it runs. You need 31/2 -41/2 lbs. of pressure coming out of the pump with a good steady flow at the pump.

This will also work, http://www.airtexproducts.com/single-pr ... id=98756AX

If you go with the mechanical pump it is a good idea to put an inline filter before the pump to catch stuff coming from the tank unless you know for sure the tank is clean. Also good for the electric pump but a lot of these small pumps do not have the power to pull through a filter.
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone

Post Reply