There is too much slack in my steering - it is from the steering wheel to the steering box, not between the steering box and the wheels. Is it simply a matter of adjusting the screw at the top of the box or do I have to pull the box out and do a complete service?
Howard
Steering Slack
Moderators: rickf, raymond, Mr. Recovery
-
- Sergeant Major
- Posts: 524
- Joined: June 6th, 2015, 7:39 am
- Location: Kuranda, Far North Queensland, Australia
Steering Slack
Howard
Daimler Ferret Mk 1/2
AM General M151A2
Austin Champ
Daimler Ferret Mk 1/2
AM General M151A2
Austin Champ
Re: Steering Slack
I'd do adjustment procedure as described in in the TM, make sure the gear oil is in the steering box
mark
1968 m274A5
1960 m151
1981 m151A2
1964 m416
1971 m416
1968 m274A5
1960 m151
1981 m151A2
1964 m416
1971 m416
Re: Steering Slack
Hambone you came up with a lot better answer than I did, I think I should be quiet as you all have better answers
mark
1968 m274A5
1960 m151
1981 m151A2
1964 m416
1971 m416
1968 m274A5
1960 m151
1981 m151A2
1964 m416
1971 m416
-
- Sergeant Major
- Posts: 524
- Joined: June 6th, 2015, 7:39 am
- Location: Kuranda, Far North Queensland, Australia
Re: Steering Slack
Thanks to both for taking the trouble to answer. The post referenced is exactly my problem so I will give the answer a try. Hopefully that fixes in
Howard
Daimler Ferret Mk 1/2
AM General M151A2
Austin Champ
Daimler Ferret Mk 1/2
AM General M151A2
Austin Champ
-
- Sergeant Major
- Posts: 524
- Joined: June 6th, 2015, 7:39 am
- Location: Kuranda, Far North Queensland, Australia
Re: Steering Slack
Followed muttguru Ken's procedure and just came back from a test drive. Steering is great now. Thanks.
Howard
Daimler Ferret Mk 1/2
AM General M151A2
Austin Champ
Daimler Ferret Mk 1/2
AM General M151A2
Austin Champ