M151A1 TRANSFER CASE OUTPUT SEAL

This is the place to get help with technical matters concerning your M151 jeep

Moderators: rickf, raymond, Mr. Recovery

Post Reply
Cowboy
Private First Class
Private First Class
Posts: 12
Joined: November 24th, 2015, 7:40 pm

M151A1 TRANSFER CASE OUTPUT SEAL

Unread post by Cowboy » February 23rd, 2018, 6:29 pm

I recently discovered I had a leak in my transmission after I cleansed it and got it unstuck, found the source which turned out to be a chunk missing out of my transfer case output seal. I’m trying to find a modern equivalent.

Anybody know a part number?

I managed to get the military PN and NSN and a few variations of it but I can’t find anything that crosses over so far.

User avatar
rickf
General
General
Posts: 19740
Joined: November 26th, 2007, 1:28 pm
Location: Pemberton, NJ.

Re: M151A1 TRANSFER CASE OUTPUT SEAL

Unread post by rickf » February 23rd, 2018, 7:52 pm

You will not find that size seal in a civilian size. You can get some that are have as wide and only have one lip but I strongly suggest you just get the factory seals. They are readily available from the surplus dealers and probably cheaper than what you would pay for the civi seals. I don't know the civi number, I just remember someone trying it years ago.
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone

User avatar
rickf
General
General
Posts: 19740
Joined: November 26th, 2007, 1:28 pm
Location: Pemberton, NJ.

Re: M151A1 TRANSFER CASE OUTPUT SEAL

Unread post by rickf » February 23rd, 2018, 7:59 pm

Here is a link to the cross reference list on our Wiki here. These parts were all submitted by members over the years and there is no guarantee on some things, especially u-joints. Buy and use at your own risk.

http://www.g838.org/public_html/wiki/do ... rence_list
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone

Post Reply