Fording Kit Valve Control Mount

This is the place to get help with technical matters concerning your M151 jeep

Moderators: rickf, raymond, Mr. Recovery

Post Reply
User avatar
m75
1st Sergeant
1st Sergeant
Posts: 499
Joined: April 12th, 2015, 2:01 pm
Location: Antelope Valley, CA

Fording Kit Valve Control Mount

Unread post by m75 » April 14th, 2018, 4:30 pm

Me again!
My A-2 arrived in my garage with the engine compartment-end of the control valve cable still protruding from the firewall grommet, but there is no deep water valve installed, and no other parts from any previous install to be seen. That's fine, as I don't want the fording kit.

Question: I have reviewed the TM but it does not illustrate the mounting of the cable from within the drivers compartment side of the dash. I just want to remove the rest of the cable. Could someone post a picture of this end for reference, to assist me?

Thanks!
Jim Peterson
SGM, 31B Retired 2015
1961 M151 -Sold
1974 M151A2, Working It!

User avatar
svramselaar
Major
Major
Posts: 1107
Joined: December 30th, 2007, 6:48 am
Location: holland

Re: Fording Kit Valve Control Mount

Unread post by svramselaar » April 15th, 2018, 4:24 am

hi

all mutt cable`s has a nut behind the dasch the outer cable has tread

george

Post Reply