something splattered on left front fender after driving
Moderators: rickf, raymond, Mr. Recovery
- Cav Trooper
- Staff Sergeant
- Posts: 145
- Joined: March 27th, 2018, 4:32 pm
Re: something splattered on left front fender after driving
I could get it up to about 150 ftlbs but then I'd have the borrow the 250 torque wrench to get higher , I've used 750 ftlb torque mulitipier before Or just dig out my cheater bar. Thanks Fil, I'll try that, maybe just needs that extra TLC. Can't figure out why it didn't leak at first. It must be the atmosphere in Fl, and sea level vs Southern Ohio.
-
- Brigadier General
- Posts: 2607
- Joined: December 9th, 2007, 10:49 am
- Location: ~ Heaven ~
Re: something splattered on left front fender after driving
If you change the crush washers remember thete sre two different sizes on that fitting.
Fil Bonica
Fil Bonica
K1ABW
- Cav Trooper
- Staff Sergeant
- Posts: 145
- Joined: March 27th, 2018, 4:32 pm
Re: something splattered on left front fender after driving
Thanks, Fil, I did not know that. NAPA?
Larry
Larry
-
- Brigadier General
- Posts: 2607
- Joined: December 9th, 2007, 10:49 am
- Location: ~ Heaven ~
Re: something splattered on left front fender after driving
Got an assortment that has both sizes.
Dont remember where.
Fil Bonica
Dont remember where.
Fil Bonica
K1ABW
Re: something splattered on left front fender after driving
When filling master cylinder, the fluid is supposed go to the bottom threads
mark
1968 m274A5
1960 m151
1981 m151A2
1964 m416
1971 m416
1968 m274A5
1960 m151
1981 m151A2
1964 m416
1971 m416
Re: something splattered on left front fender after driving
Just a FYI, The method I use for chasing oil and coolant leaks is to use UV dye. Advance sells the UV light and glasses for less than 20 bucks and the dye is less than 10 buck a bottle. There is a separate dye for coolant, oil and Air conditioning.
Lee
Lee