Help identify ignition wires 7062196

This is the place to get help with technical matters concerning your M151 jeep

Moderators: rickf, raymond, Mr. Recovery

Post Reply
User avatar
Vzike
Sergeant Major of the "G"
Sergeant Major of the "G"
Posts: 729
Joined: December 27th, 2013, 4:05 pm
Location: Jupiter, Florida

Help identify ignition wires 7062196

Unread post by Vzike » September 15th, 2018, 2:26 pm

I've come up with six NOS ignition wires. They are NOT for M151 series vehicle. The tag on them reads 7062196. one side it angled and fits in the same port as the M151 distributer. The spark plug side is totally different than the M151 pluts. It has a push in end, that makes contact (without the spring), the red rubber is cone shaped near the nut end, and the nut is a much larger thread than those on the Autolite 2245 spark plugs.

They all measure about 12-1/2" from right angle tube bend to nut cap.

Anyone know what these are for??? PM your email and I'll send a pic.

User avatar
raymond
Major General
Major General
Posts: 3424
Joined: November 26th, 2007, 8:29 pm
Location: God's country, Clarksville Mo.

Re: Help identify ignition wires 7062196

Unread post by raymond » September 15th, 2018, 7:21 pm

M38/M38A1 :?:
Raymond


"On the day when crime puts on the apparel of innocence, through a curious reversal peculiar to our age, it is innocence that is called on to justify itself." Albert Camus

User avatar
Vzike
Sergeant Major of the "G"
Sergeant Major of the "G"
Posts: 729
Joined: December 27th, 2013, 4:05 pm
Location: Jupiter, Florida

Re: Help identify ignition wires 7062196

Unread post by Vzike » September 18th, 2018, 10:47 am

raymond wrote:M38/M38A1 :?:
I don't think so. The spark plug side nut is a larger thread than the plugs for M38 (which is the same size as for an M151, right?)

User avatar
Surveyor
Terminal
Posts: 1092
Joined: November 13th, 2015, 3:56 pm
Location: Cajun Country

Re: Help identify ignition wires 7062196

Unread post by Surveyor » September 18th, 2018, 12:17 pm

M60 or similar?

https://www.amazon.com/US-Army-Electric ... B0787VCC6C

Now you just need all the rest of the parts...
Last edited by Surveyor on September 18th, 2018, 12:24 pm, edited 1 time in total.
1960 M151 Run #1
"There is one nut on a M151 that is very difficult to remove....." - K8icu
"She ain't a Cadillac and she ain't a Rolls, But there ain't nothin' wrong with the radio" - Aaron Tippin
Image

User avatar
rickf
General
General
Posts: 19738
Joined: November 26th, 2007, 1:28 pm
Location: Pemberton, NJ.

Re: Help identify ignition wires 7062196

Unread post by rickf » September 18th, 2018, 12:22 pm

M60 tank was diesel. But that wire looks like Vin's description.
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone

User avatar
Surveyor
Terminal
Posts: 1092
Joined: November 13th, 2015, 3:56 pm
Location: Cajun Country

Re: Help identify ignition wires 7062196

Unread post by Surveyor » September 18th, 2018, 12:38 pm

Listed here as a cross-reference item for a diesel engine...

http://automotiveenginemechanics.tpub.c ... 4P_298.htm

Manual - https://www.nsncenter.com/Library/TM/TM-9-2815-220-34P for a 12 cylinder turbo d. Shown in figure 46, Item 20.
1960 M151 Run #1
"There is one nut on a M151 that is very difficult to remove....." - K8icu
"She ain't a Cadillac and she ain't a Rolls, But there ain't nothin' wrong with the radio" - Aaron Tippin
Image

Post Reply