clutch pedal free play
Moderators: rickf, raymond, Mr. Recovery
clutch pedal free play
My pedal has no free play(1.5")went to lengthen the rod but can't as the z tube bracket will not move out any more.Between last adjustment and now is 4000 miles, 5 years.The clutch doesn't slip, I guess the clutch is nearing the end of the service life so it will start slipping til no go no more.I guess I expected the clutch to last longer
mark
1968 m274A5
1960 m151
1981 m151A2
1964 m416
1971 m416
1968 m274A5
1960 m151
1981 m151A2
1964 m416
1971 m416
-
- Staff Sergeant
- Posts: 123
- Joined: February 5th, 2014, 8:56 am
- Location: Brisbane Australia
Re: clutch pedal free play
I'm adjusting my clutch also, but I've never heard of a z tube bracket. Can someone describe it please.
- svramselaar
- Major
- Posts: 1109
- Joined: December 30th, 2007, 6:48 am
- Location: holland
Re: clutch pedal free play
hi
you must turn the rod IN not out to get more play at the bearing
i think for the Z tube he ment the shaft between the adjusting rod and the rod at the pedal
george
you must turn the rod IN not out to get more play at the bearing
i think for the Z tube he ment the shaft between the adjusting rod and the rod at the pedal
george
Re: clutch pedal free play
The Z tube, or Z bar, is the piece that the rod from the pedal and the rod to the clutch arm attach to. It goes between the frame and the engine and the bracket mentioned is mounted on the frame.
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone