Bolt Torque

vtdeucedriver · Unread post by **vtdeucedriver** » March 17th, 2008, 1:47 am

Hey all, I dont have any manuals yet but I have my parts. Can anyone tell me what the torque is for the intake and exhaust manifold bolts??? I have posted on 2 forums and still no answer..................THANKS!!

moose53 · Unread post by **moose53** » March 17th, 2008, 3:12 am

according to the -34

Exhaust
alternately tighten all four capscrews before final tightening to 12-16 lb ft.
lower capscrew (on flange) tighten to 20-30 lb ft.

Intake
Upper (top) capscrews to 10-15 lb ft, then lower capscrews to 8-10 lb ft
then tighten uppers to 23-28 lb ft, lowers to 16-22 lb ft.

hope that helps...

Jim

Ralph Fuller · Unread post by **Ralph Fuller** » March 17th, 2008, 1:35 pm

Jeff: All of the manuals (PDF) you need for your Jeep can be found at:
http://www.pedros.cz/