Engine part wanted.

vtdeucedriver · Unread post by **vtdeucedriver** » March 22nd, 2008, 12:04 pm

Looking for the fitting that holds the PCV valve and screws into the top of the manifold.

Thanks.

Mr. Recovery · Unread post by **Mr. Recovery** » March 22nd, 2008, 1:08 pm

Hi Jeff, I have an extra you can have. PM me your shipping address.

Dan.

Ralph Fuller · Unread post by **Ralph Fuller** » March 22nd, 2008, 7:49 pm

Hey....it doesn't get any better than that.....I REALLY like this site.

vtdeucedriver · Unread post by **vtdeucedriver** » June 14th, 2008, 6:05 am

Hey dan, I have not forgot about you bailing me out with that fitting. You have a box comming your way. THANKS AGAIN!!!

Mr. Recovery · Unread post by **Mr. Recovery** » June 14th, 2008, 11:49 pm

Happy I could help

Dan.

mrdibbles · Unread post by **mrdibbles** » June 15th, 2008, 8:51 am

Don't you need to confirm if it's a vehicle with a fording system or not? That brass fitting is different when a fording system is equipped. BTW... Mr. Recovery that was very generous of you... your kharma points just jumped a few notches

Mr. Recovery · Unread post by **Mr. Recovery** » June 17th, 2008, 11:16 am

Jeff. Just want to let you know the box arrived yesterday and none of the "eggs" got broken

Thanks!

Dan.

vtdeucedriver · Unread post by **vtdeucedriver** » June 18th, 2008, 10:00 am

Cool, that should last you for a while

Engine part wanted.

Engine part wanted.

Re: Engine part wanted.

Re: Engine part wanted.

Re: Engine part wanted.

Re: Engine part wanted.

Re: Engine part wanted.