an the Istallation Instructions be found for the radio kit? Need the locations for the sponson plate,etc. Looked in the TMs and didn't find anything or I missed it.
Thanks
Istallation Instructions
Moderators: rickf, raymond, Mr. Recovery
Istallation Instructions
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf."
George Orwell
-------------------------------------
"I once was one of those men."
salt6
http://www.mg42.us
George Orwell
-------------------------------------
"I once was one of those men."
salt6
http://www.mg42.us
Re: Istallation Instructions
I'll email you the drawings later tonite when I get home....salt6 wrote:an the Istallation Instructions be found for the radio kit? Need the locations for the sponson plate,etc. Looked in the TMs and didn't find anything or I missed it.
Thanks
Jim
Zigzag50, Northeast51, KC2QDZ
MVPA # 30032 G838.org
--------------------------------------
1971 G838-M151A2 1966 G857-M416
1968 G748-M101A1 1976 G748-M116A1
1990 MEP-701A
--------------------------------------
Real jeeps have horizontal grille slots
MVPA # 30032 G838.org
--------------------------------------
1971 G838-M151A2 1966 G857-M416
1968 G748-M101A1 1976 G748-M116A1
1990 MEP-701A
--------------------------------------
Real jeeps have horizontal grille slots
Re: Istallation Instructions
Thanks,
salt
salt
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf."
George Orwell
-------------------------------------
"I once was one of those men."
salt6
http://www.mg42.us
George Orwell
-------------------------------------
"I once was one of those men."
salt6
http://www.mg42.us
-
armyvehicles
- Staff Sergeant
- Posts: 125
- Joined: December 30th, 2009, 6:13 pm
- Location: Denmark
- Contact:
Re: Istallation Instructions
Hi Jim !moose53 wrote:I'll email you the drawings later tonite when I get home....salt6 wrote:an the Istallation Instructions be found for the radio kit? Need the locations for the sponson plate,etc. Looked in the TMs and didn't find anything or I missed it.
Thanks
Jim
Could they be available at the Wiki as well ? Got at friend needing this INFO too.
Thnx in advance
Henrik
1969 M151A1 (Ex Danish Army)
Re: Istallation Instructions
here's what I have...
Jim
Jim
Zigzag50, Northeast51, KC2QDZ
MVPA # 30032 G838.org
--------------------------------------
1971 G838-M151A2 1966 G857-M416
1968 G748-M101A1 1976 G748-M116A1
1990 MEP-701A
--------------------------------------
Real jeeps have horizontal grille slots
MVPA # 30032 G838.org
--------------------------------------
1971 G838-M151A2 1966 G857-M416
1968 G748-M101A1 1976 G748-M116A1
1990 MEP-701A
--------------------------------------
Real jeeps have horizontal grille slots
-
armyvehicles
- Staff Sergeant
- Posts: 125
- Joined: December 30th, 2009, 6:13 pm
- Location: Denmark
- Contact:
Re: Istallation Instructions
Thank you, Moose !moose53 wrote:here's what I have...
[Jim
Highly appreciated !
All the best.
Henrik
1969 M151A1 (Ex Danish Army)
Re: Istallation Instructions
Thanks
salt
salt
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf."
George Orwell
-------------------------------------
"I once was one of those men."
salt6
http://www.mg42.us
George Orwell
-------------------------------------
"I once was one of those men."
salt6
http://www.mg42.us
Re: Istallation Instructions
What size bolts are you guys using to mount the sponson plate? I'm ready to drill. 
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf."
George Orwell
-------------------------------------
"I once was one of those men."
salt6
http://www.mg42.us
George Orwell
-------------------------------------
"I once was one of those men."
salt6
http://www.mg42.us
Re: Istallation Instructions
Well got ready to install the sponson support plate and had a problem.
Here's mine,
And here's one from another member on the site.
See anything diferent.
I guess they put mine in the stamping machine backwards after drilling the holes.
Time to get my drill out.
Also you can get a good idea for the support leg dimentions.
Here's mine,
And here's one from another member on the site.
See anything diferent.
I guess they put mine in the stamping machine backwards after drilling the holes.
Time to get my drill out.
Also you can get a good idea for the support leg dimentions.
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf."
George Orwell
-------------------------------------
"I once was one of those men."
salt6
http://www.mg42.us
George Orwell
-------------------------------------
"I once was one of those men."
salt6
http://www.mg42.us