Cover for PRC and Powersupply ??
Moderators: rickf, raymond, Mr. Recovery
-
- Master Sergeant
- Posts: 377
- Joined: October 28th, 2009, 10:37 am
- Location: Ypsilanti Michigan
Cover for PRC and Powersupply ??
Howdy !! Just curious what cover is used for a PRC-77 and power supply combo ?? Is it the same cover as the RT524 or is it something else (doesn't look like the dimensions would be the same??
In any event, I'm looking for a cover for a AM2060 with a PRC-77 mounted in it. Any help would be appreciated...
Thanks !!
In any event, I'm looking for a cover for a AM2060 with a PRC-77 mounted in it. Any help would be appreciated...
Thanks !!
- richard
- Command Sergeant Major
- Posts: 620
- Joined: August 10th, 2011, 5:52 am
- Location: Lower Saxony, Germany
- Contact:
Re: Cover for PRC and Powersupply ??
I am also still looking for the same cover.
European Distributor for CMD Body Panels: http://www.M151BodyPanels.eu
1978 M151-A2
1978 M416-A1
1972 M561
1964 M35-A2 w/winch & shelter
1978 M151-A2
1978 M416-A1
1972 M561
1964 M35-A2 w/winch & shelter
Re: Cover for PRC and Powersupply ??
same canvas cover for the RT524 or 2060 power supply with the PRC25/77 check ebay the guy in italy alway has them for sale at 99dollars plus shipping < otello51> it was one on ebay 2 day ago for 75dollars in utha
frenchman
frenchman
- Jay Mallari
- 1st Lieutenant
- Posts: 931
- Joined: December 7th, 2007, 10:30 pm
- Location: Middlesex, England
Re: Cover for PRC and Powersupply ??
If you cant find the canvas, the AM2060 and RT 524 use the same mount (MT 1029) so the steel cover can be used as well.
Re: Cover for PRC and Powersupply ??
very nice set up of the RT524 but the ant tuner cable need to be turned around that will look even better
frenchman
frenchman
- Jay Mallari
- 1st Lieutenant
- Posts: 931
- Joined: December 7th, 2007, 10:30 pm
- Location: Middlesex, England
Re: Cover for PRC and Powersupply ??
100% agree. This photo is nearly 3 years old and the cable had been repositioned since.
I didn't kow what I was thinking at the time
I didn't kow what I was thinking at the time
Re: Cover for PRC and Powersupply ??
Jay Mallari wrote:If you cant find the canvas, the AM2060 and RT 524 use the same mount (MT 1029) so the steel cover can be used as well.
But where to get one?
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf."
George Orwell
-------------------------------------
"I once was one of those men."
salt6
http://www.mg42.us
George Orwell
-------------------------------------
"I once was one of those men."
salt6
http://www.mg42.us
- Jay Mallari
- 1st Lieutenant
- Posts: 931
- Joined: December 7th, 2007, 10:30 pm
- Location: Middlesex, England
Re: Cover for PRC and Powersupply ??
Have you tried Steve Haney or Tony Banks?
-
- Master Sergeant
- Posts: 377
- Joined: October 28th, 2009, 10:37 am
- Location: Ypsilanti Michigan
Re: Cover for PRC and Powersupply ??
Thanks for the info, Jay. Do you have contact info for Steve and Tony??
1966 M151A1 ___All matching '44 M1 Garand
1951 H&R M1 Garland__1966 Fairlane GTA
1973 Torino wagon_____1942 03A3 - Unissued
1939 Unissued 1903____1944 M1 Inland Carbine
1966 M-16____________1943 1911A1
1918 Model 1917 .45 Revolver
1943 M1 Quality Hardware Carbine
1967 Saginaw 1919A6
1943 Saginaw 1919A4
1952 M1C and M1D Garands
KD8QEQ
1951 H&R M1 Garland__1966 Fairlane GTA
1973 Torino wagon_____1942 03A3 - Unissued
1939 Unissued 1903____1944 M1 Inland Carbine
1966 M-16____________1943 1911A1
1918 Model 1917 .45 Revolver
1943 M1 Quality Hardware Carbine
1967 Saginaw 1919A6
1943 Saginaw 1919A4
1952 M1C and M1D Garands
KD8QEQ
-
- Master Sergeant
- Posts: 377
- Joined: October 28th, 2009, 10:37 am
- Location: Ypsilanti Michigan
Re: Cover for PRC and Powersupply ??
Anybody know where to find the metal type ?? That would be pretty cool as well...
1966 M151A1 ___All matching '44 M1 Garand
1951 H&R M1 Garland__1966 Fairlane GTA
1973 Torino wagon_____1942 03A3 - Unissued
1939 Unissued 1903____1944 M1 Inland Carbine
1966 M-16____________1943 1911A1
1918 Model 1917 .45 Revolver
1943 M1 Quality Hardware Carbine
1967 Saginaw 1919A6
1943 Saginaw 1919A4
1952 M1C and M1D Garands
KD8QEQ
1951 H&R M1 Garland__1966 Fairlane GTA
1973 Torino wagon_____1942 03A3 - Unissued
1939 Unissued 1903____1944 M1 Inland Carbine
1966 M-16____________1943 1911A1
1918 Model 1917 .45 Revolver
1943 M1 Quality Hardware Carbine
1967 Saginaw 1919A6
1943 Saginaw 1919A4
1952 M1C and M1D Garands
KD8QEQ
- Jay Mallari
- 1st Lieutenant
- Posts: 931
- Joined: December 7th, 2007, 10:30 pm
- Location: Middlesex, England
Re: Cover for PRC and Powersupply ??
For the metal cover,
Steve Haney
tc0654@mesh.net
Haney Electronic Company
8012 County Road 1009
Godley TX 76044-3688
817-309-2220
Tony Banks
I don't have his contact details but you can send him a PM on this board.
His username is Tbanks. He also sells on Ebay -- tbanks67
Steve Haney
tc0654@mesh.net
Haney Electronic Company
8012 County Road 1009
Godley TX 76044-3688
817-309-2220
Tony Banks
I don't have his contact details but you can send him a PM on this board.
His username is Tbanks. He also sells on Ebay -- tbanks67
-
- Master Sergeant
- Posts: 377
- Joined: October 28th, 2009, 10:37 am
- Location: Ypsilanti Michigan
Re: Cover for PRC and Powersupply ??
Thanks Jay !!
Have a nice day and happy motoring !!
Have a nice day and happy motoring !!
1966 M151A1 ___All matching '44 M1 Garand
1951 H&R M1 Garland__1966 Fairlane GTA
1973 Torino wagon_____1942 03A3 - Unissued
1939 Unissued 1903____1944 M1 Inland Carbine
1966 M-16____________1943 1911A1
1918 Model 1917 .45 Revolver
1943 M1 Quality Hardware Carbine
1967 Saginaw 1919A6
1943 Saginaw 1919A4
1952 M1C and M1D Garands
KD8QEQ
1951 H&R M1 Garland__1966 Fairlane GTA
1973 Torino wagon_____1942 03A3 - Unissued
1939 Unissued 1903____1944 M1 Inland Carbine
1966 M-16____________1943 1911A1
1918 Model 1917 .45 Revolver
1943 M1 Quality Hardware Carbine
1967 Saginaw 1919A6
1943 Saginaw 1919A4
1952 M1C and M1D Garands
KD8QEQ
- Jay Mallari
- 1st Lieutenant
- Posts: 931
- Joined: December 7th, 2007, 10:30 pm
- Location: Middlesex, England
Re: Cover for PRC and Powersupply ??
You're most welcome. Do let us know if Steve or Tony still stock them so we don't have to recommend
them in future if they have run out.
Jay
them in future if they have run out.
Jay
-
- Master Sergeant
- Posts: 377
- Joined: October 28th, 2009, 10:37 am
- Location: Ypsilanti Michigan
Re: Cover for PRC and Powersupply ??
Got a reply from Mr. Haney - the metal "cover" is actually used to mount the crypto gear over the radios. He had a bunch of those a while back, but alas, they are all gone. Waiting for a response back from Mr. Banks. Perhaps he might have some leads ??
1966 M151A1 ___All matching '44 M1 Garand
1951 H&R M1 Garland__1966 Fairlane GTA
1973 Torino wagon_____1942 03A3 - Unissued
1939 Unissued 1903____1944 M1 Inland Carbine
1966 M-16____________1943 1911A1
1918 Model 1917 .45 Revolver
1943 M1 Quality Hardware Carbine
1967 Saginaw 1919A6
1943 Saginaw 1919A4
1952 M1C and M1D Garands
KD8QEQ
1951 H&R M1 Garland__1966 Fairlane GTA
1973 Torino wagon_____1942 03A3 - Unissued
1939 Unissued 1903____1944 M1 Inland Carbine
1966 M-16____________1943 1911A1
1918 Model 1917 .45 Revolver
1943 M1 Quality Hardware Carbine
1967 Saginaw 1919A6
1943 Saginaw 1919A4
1952 M1C and M1D Garands
KD8QEQ