151 with M2 hb

poof · Unread post by **poof** » April 4th, 2013, 12:36 pm

spring is (trying to pop) up here.
I have been waiting for an m23 mount to arrive to mount the 50 on the 1/4 ton..
Just till I get the halftrack completed then the 60 go's back on top of jeep and 50 to the track..
but I thought I would show it off..
This Saturday is an event to raise moneys for the WWII fredom flight to DC memorial.for WWII VETS. I was asked to park it for display their... need to take off winter tires and toss on the NDCC tomorrow and give it a good wash...

poof · Unread post by **poof** » April 4th, 2013, 12:48 pm

on a side note looking for these 2 things...to complete

Looking for any condition m2 browning carry handle and or a flash hider that attaches with shims and (4) bolts/nuts like these if picture shows....

Email or PM needs/ $$$ ... trades have 22LR ammo also..some ar magazines or 9mm Cproduct ar mags or armalite ar10 mags too
please include cash price.. I can find retail all over the internet.. looking for this stuff on the cheap thanks.

salt6 · Unread post by **salt6** » April 4th, 2013, 1:09 pm

Try the guy on eBay down in Texas.

Sent from my iPhone using Tapatalk.

mrdibbles · Unread post by **mrdibbles** » April 4th, 2013, 6:57 pm

I love the scale and significance of that wire cutter! If Conan the Barbarian sees that he's going to accuse you of raiding his armory... and you best be hoping he's on foot.

Unread post by **rickf** » April 4th, 2013, 7:25 pm

I do have to say, that is one hell of a tow bar! (remembering Ralph again.) Poof, that was an inside joke that went on forever with Uglyranger on here.

HEPROX · Unread post by **HEPROX** » April 14th, 2013, 5:42 pm

That MA Deuce is awesome...does it fit in the pedestal for the 60?

moose53 · Unread post by **moose53** » April 14th, 2013, 11:09 pm

any long pintle cradle will work with the M4 pedestal.

Jim

HEPROX · Unread post by **HEPROX** » April 15th, 2013, 1:28 pm

Thank you Moose...I am interested in doing a Range Gun Jeep...I am going to try and mount a .50 like this one and an M60 on the passenger side in the front, I just have not figured it out yet...any ideas??

Jay Mallari · Unread post by **Jay Mallari** » April 15th, 2013, 4:26 pm

HEPROX · Unread post by **HEPROX** » April 15th, 2013, 10:14 pm

I love it....what type of mount is that and is the pintle long or short? do you think this swing arm would work?

http://www.bmgparts.com/products/SwingArm1.jpg

Jay Mallari · Unread post by **Jay Mallari** » April 16th, 2013, 4:47 am

HEPROX wrote:I love it....what type of mount is that and is the pintle long or short?

This is a USMC field mod mount for their FAV's. It's actually the top portion of the M4 pedestal mount that has been cut
off and welded to the dash. The cradle mount in the pic is a M142 long pintle for the M60. A similar pedestal socket
http://www.bmgparts.com/products/socket.jpg

If you are trying to restore a gun jeep similar to the ones used by Rangers during the Grenada invasion, I personally don't think
the mount with the swing arm in your link will be accurate. You could probably use a M48 dash mount instead but you need to modify
it for your application.
http://www.bmgparts.com/products/m48110.jpg

151 with M2 hb

151 with M2 hb

Re: 151 with M2 hb

151 with M2 hb

Re: 151 with M2 hb

Re: 151 with M2 hb

Re: 151 with M2 hb

Re: 151 with M2 hb

Re: 151 with M2 hb

Re: 151 with M2 hb

Re: 151 with M2 hb

Re: 151 with M2 hb