I have a 1966 Stevens M416 & have found different references to different Bolt Patterns
the original military rims were removed by the previous owner & had old stock jeep steel rims added
however the trailer is at my parents & I'm avoiding running over there to measure the bolt pattern
is it 5x4.5 or is it 5x5 ?
many thanks
M416 Bolt Pattern ?
Moderators: rickf, raymond, Mr. Recovery
-
- Private First Class
- Posts: 20
- Joined: December 5th, 2013, 12:18 am
- Location: Vermont Mountains
- Contact:
M416 Bolt Pattern ?
vermonttrailexplorer.com
2004 GMC Yukon, 4X4 SLT, 5.3L Vortex,
1966 Stevens M416 trailer too
"Now she is gone I got my Yukon"
2004 GMC Yukon, 4X4 SLT, 5.3L Vortex,
1966 Stevens M416 trailer too
"Now she is gone I got my Yukon"
- Mr. Recovery
- Brigadier General
- Posts: 2895
- Joined: December 5th, 2007, 9:03 pm
- Location: New Port Richey, Fl.
- Contact:
Re: M416 Bolt Pattern ?
Hi, it is 5X5 but, you should make sure they didn't change the studs, "most" of the original studs have a long shoulder that will cause most acorn lug nuts not to tighten properly on the other wheels that fit.
1960 M151 Run 1
1963 M151 Willys DoD 10-63 in Baltimore
1989 Alley Cat. "work in Progress"
NRA Life Member
American Legion Post 275 Fl
US Army 6 years 2nd Armored Cavalry Bindlach Germany
Colorado Army Nat. Guard 5 years
Md Air Guard 15 years active duty on C-130's
1963 M151 Willys DoD 10-63 in Baltimore
1989 Alley Cat. "work in Progress"
NRA Life Member
American Legion Post 275 Fl
US Army 6 years 2nd Armored Cavalry Bindlach Germany
Colorado Army Nat. Guard 5 years
Md Air Guard 15 years active duty on C-130's
-
- Private First Class
- Posts: 20
- Joined: December 5th, 2013, 12:18 am
- Location: Vermont Mountains
- Contact:
Re: M416 Bolt Pattern ?
thanks, I will check into that as well
here's about the only pic I have that sort of shows the rim & lug nuts
I wish the guy I bought it from would have left the original 7x16 rims on it
here's about the only pic I have that sort of shows the rim & lug nuts
I wish the guy I bought it from would have left the original 7x16 rims on it
vermonttrailexplorer.com
2004 GMC Yukon, 4X4 SLT, 5.3L Vortex,
1966 Stevens M416 trailer too
"Now she is gone I got my Yukon"
2004 GMC Yukon, 4X4 SLT, 5.3L Vortex,
1966 Stevens M416 trailer too
"Now she is gone I got my Yukon"
- Mr. Recovery
- Brigadier General
- Posts: 2895
- Joined: December 5th, 2007, 9:03 pm
- Location: New Port Richey, Fl.
- Contact:
Re: M416 Bolt Pattern ?
It takes the same rim as the Mutt, I'm sure you know that, they are easy to come by, you can get them for about 25 ea. Looking closely at your photo it looks like the lug nuts may be reversed so, I think the studs are 416 studs as there is a lot of thread showing, this would be one way to get the wheel tight against the hub.
1960 M151 Run 1
1963 M151 Willys DoD 10-63 in Baltimore
1989 Alley Cat. "work in Progress"
NRA Life Member
American Legion Post 275 Fl
US Army 6 years 2nd Armored Cavalry Bindlach Germany
Colorado Army Nat. Guard 5 years
Md Air Guard 15 years active duty on C-130's
1963 M151 Willys DoD 10-63 in Baltimore
1989 Alley Cat. "work in Progress"
NRA Life Member
American Legion Post 275 Fl
US Army 6 years 2nd Armored Cavalry Bindlach Germany
Colorado Army Nat. Guard 5 years
Md Air Guard 15 years active duty on C-130's
-
- Private First Class
- Posts: 20
- Joined: December 5th, 2013, 12:18 am
- Location: Vermont Mountains
- Contact:
Re: M416 Bolt Pattern ?
thanks !
& no was not aware of the mutt & this
dont really have a lot of knowledge about these neat little trailers & rigs
& no was not aware of the mutt & this
dont really have a lot of knowledge about these neat little trailers & rigs
vermonttrailexplorer.com
2004 GMC Yukon, 4X4 SLT, 5.3L Vortex,
1966 Stevens M416 trailer too
"Now she is gone I got my Yukon"
2004 GMC Yukon, 4X4 SLT, 5.3L Vortex,
1966 Stevens M416 trailer too
"Now she is gone I got my Yukon"