M416 Chassy Measurement
Moderators: rickf, raymond, Mr. Recovery
-
- Staff Sergeant
- Posts: 130
- Joined: January 1st, 2008, 8:05 pm
- Location: City of 7 lakes, Philippines
M416 Chassy Measurement
guys,
good day! it's been quite sometime now since my last post...... assisting a colleague of mine and Jay in restoring a newly acquire m416 trailer. him and Jay acquire their trailers within weeks apart. just read that Jay is already sourcing-out some parts that he needed. already talk to him regarding some hard to acquire parts locally but couldn't assist on such measurements. as for our friend, we need some measurements so we can finalize the location of the leafspring hanger on the chassy since it was wrongly repaired by the previous owner by installing a different length (33-1/2") leafspring: if you may, we would like to ask for the exact distance/measurements between the center to center hole distance/length of the FRONT and REAR LEAFSPRING HANGER and the length of the DRAW BARS. would also like to confirm if the un-installed leafspring specification (36-1/4" center to center distance x 1-3/4" wide x 9/16" pivot bolt x 10 leaves) base on our researched is correct for the trailer
best regard's
-percy-
good day! it's been quite sometime now since my last post...... assisting a colleague of mine and Jay in restoring a newly acquire m416 trailer. him and Jay acquire their trailers within weeks apart. just read that Jay is already sourcing-out some parts that he needed. already talk to him regarding some hard to acquire parts locally but couldn't assist on such measurements. as for our friend, we need some measurements so we can finalize the location of the leafspring hanger on the chassy since it was wrongly repaired by the previous owner by installing a different length (33-1/2") leafspring: if you may, we would like to ask for the exact distance/measurements between the center to center hole distance/length of the FRONT and REAR LEAFSPRING HANGER and the length of the DRAW BARS. would also like to confirm if the un-installed leafspring specification (36-1/4" center to center distance x 1-3/4" wide x 9/16" pivot bolt x 10 leaves) base on our researched is correct for the trailer
best regard's
-percy-
the LAST 1/4 ton of FUN....
Re: M416 Chassy Measurement
Hi Deserttmutt, I should be able to get you the hanger specs you ask for since I still do not have the body on mine. The drawbar will not be an issue either. I cannot get these measurements until tomorrow evening though due to work and a side job tomorrow. I can get you the width and number of leaves in the springs but mine are mounted so I cannot help with the unloaded measurement. I can measure what they are on there which is probably the same as unloaded since there is nothing on them but the bare frame.
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
-
- Staff Sergeant
- Posts: 130
- Joined: January 1st, 2008, 8:05 pm
- Location: City of 7 lakes, Philippines
Re: M416 Chassy Measurement
that would be GREAT Rick appreciate it a lot! thanks....
regard's
-percy-
regard's
-percy-
the LAST 1/4 ton of FUN....
Re: M416 Chassy Measurement
Sorry for the delay, had to quote a side job and got tied up. The center to center measurements I have are the spring with nothing but the trailer frame on it is 35 5/8".
The Drawbar from back to just inside the front outer edge is 40" and the hangers are 35".
The drawbar is square cut at the back closer to the axle and cut on an angle in the front so it is straight across on top, parallel to the rest of the frame. Since everything is installed on mine I made the measurements from grease nipple to grease nipple. That will be as close to center as you will ever get.
The Drawbar from back to just inside the front outer edge is 40" and the hangers are 35".
The drawbar is square cut at the back closer to the axle and cut on an angle in the front so it is straight across on top, parallel to the rest of the frame. Since everything is installed on mine I made the measurements from grease nipple to grease nipple. That will be as close to center as you will ever get.
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
-
- Staff Sergeant
- Posts: 130
- Joined: January 1st, 2008, 8:05 pm
- Location: City of 7 lakes, Philippines
Re: M416 Chassy Measurement
"beggar's can't be chooser's" Rick many many thanks for the time and assistance! this will lessen our guess work and the restoration much easier
best regard's
-percy-
best regard's
-percy-
the LAST 1/4 ton of FUN....
- Mr. Recovery
- Brigadier General
- Posts: 2895
- Joined: December 5th, 2007, 9:03 pm
- Location: New Port Richey, Fl.
- Contact:
Re: M416 Chassy Measurement
I didn't take any measurements but here's a few photos of mine when I did it.
Here are 2 links to my post on the tear down and reassembly of mine.
http://g838.org/viewtopic.php?f=8&t=2707
http://g838.org/viewtopic.php?f=8&t=3859
Here are 2 links to my post on the tear down and reassembly of mine.
http://g838.org/viewtopic.php?f=8&t=2707
http://g838.org/viewtopic.php?f=8&t=3859
1960 M151 Run 1
1963 M151 Willys DoD 10-63 in Baltimore
1989 Alley Cat. "work in Progress"
NRA Life Member
American Legion Post 275 Fl
US Army 6 years 2nd Armored Cavalry Bindlach Germany
Colorado Army Nat. Guard 5 years
Md Air Guard 15 years active duty on C-130's
1963 M151 Willys DoD 10-63 in Baltimore
1989 Alley Cat. "work in Progress"
NRA Life Member
American Legion Post 275 Fl
US Army 6 years 2nd Armored Cavalry Bindlach Germany
Colorado Army Nat. Guard 5 years
Md Air Guard 15 years active duty on C-130's
Re: M416 Chassy Measurement
In Dan's third and last pictures you can see what I was talking about with the forward ends of the drawbars cut on an angle.
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone