by rickf » January 16th, 2017, 7:51 pm
The A1 uses 11/16" wrench size and the A2 uses 3/4" wrench size. The correct tool for the A2 for the most part was a double ended tool with 11/16" on one end and 3/3" on the other. The A1 tool only had the 11/16" on one end.
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone