Page 1 of 1

Winch ID

PostPosted: August 13th, 2009, 7:44 pm
by salt6
This was on the front of my MUTT. I took it off because it was tearing the front bumper mounts out. Anyone got any idea what it is? The guy I got it from was an active duty marine and had installed it on the front bumper.

Image

Image

Image

Image

Image

Did I mention it's HEAVY.

Re: Winch ID

PostPosted: August 14th, 2009, 1:36 am
by moose53
looks to me kinda like the ones used on humvees, but I'm not sure about that.

Jim

Re: Winch ID

PostPosted: August 14th, 2009, 5:07 am
by rickf
Looks like a Warn 10,000 lb.. Is it electric or hydraulic? If electric is it 24 volt? I notice you have the mutt on the trailer backwards??? That is putting WAY to much weight bias towards the back of the trailer, You need at least 7-10% of the total load on the tongue for stability. Is the left front suspension bent? Even pulled down tight it should not be bent like that.

Rick

Re: Winch ID

PostPosted: August 14th, 2009, 6:59 pm
by salt6
It's 24 volts.

Photo is about two years old now, and yes I figured that out on the drive home. :D

Prepping for a total respray. It has the wrong springs on the front. Got replacements from HK awhile back just haven't had time to put them on.