This was on the front of my MUTT. I took it off because it was tearing the front bumper mounts out. Anyone got any idea what it is? The guy I got it from was an active duty marine and had installed it on the front bumper.
Did I mention it's HEAVY.
Winch ID
Moderators: rickf, raymond, Mr. Recovery
Winch ID
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf."
George Orwell
-------------------------------------
"I once was one of those men."
salt6
http://www.mg42.us
George Orwell
-------------------------------------
"I once was one of those men."
salt6
http://www.mg42.us
Re: Winch ID
looks to me kinda like the ones used on humvees, but I'm not sure about that.
Jim
Jim
Zigzag50, Northeast51, KC2QDZ
MVPA # 30032 G838.org
--------------------------------------
1971 G838-M151A2 1966 G857-M416
1968 G748-M101A1 1976 G748-M116A1
1990 MEP-701A
--------------------------------------
Real jeeps have horizontal grille slots
MVPA # 30032 G838.org
--------------------------------------
1971 G838-M151A2 1966 G857-M416
1968 G748-M101A1 1976 G748-M116A1
1990 MEP-701A
--------------------------------------
Real jeeps have horizontal grille slots
Re: Winch ID
Looks like a Warn 10,000 lb.. Is it electric or hydraulic? If electric is it 24 volt? I notice you have the mutt on the trailer backwards??? That is putting WAY to much weight bias towards the back of the trailer, You need at least 7-10% of the total load on the tongue for stability. Is the left front suspension bent? Even pulled down tight it should not be bent like that.
Rick
Rick
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
Re: Winch ID
It's 24 volts.
Photo is about two years old now, and yes I figured that out on the drive home.
Prepping for a total respray. It has the wrong springs on the front. Got replacements from HK awhile back just haven't had time to put them on.
Photo is about two years old now, and yes I figured that out on the drive home.
Prepping for a total respray. It has the wrong springs on the front. Got replacements from HK awhile back just haven't had time to put them on.
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf."
George Orwell
-------------------------------------
"I once was one of those men."
salt6
http://www.mg42.us
George Orwell
-------------------------------------
"I once was one of those men."
salt6
http://www.mg42.us