Rear lights. Wire color coded
Moderators: rickf, raymond, Mr. Recovery
Rear lights. Wire color coded
Anyone taken the tape off the wires that go to the rear brake lights. There is a green, white and black wire. *** No numbers on the wires.*** Just need to know where each color goes.
The female ends have numbers, just not the male ends. Thanks
The female ends have numbers, just not the male ends. Thanks
Last edited by acudanut on November 1st, 2018, 10:52 am, edited 1 time in total.
-
- Sergeant Major
- Posts: 524
- Joined: June 6th, 2015, 7:39 am
- Location: Kuranda, Far North Queensland, Australia
Re: Rear lights. Wire color coded
To the best of my recollection there is no tape normally fitted to the wires and they are all coloured black with a number attached. Sounds like someone has repaired the light at some stage, replacing the original wires with their own colour code.
Howard
Daimler Ferret Mk 1/2
AM General M151A2
Austin Champ
Daimler Ferret Mk 1/2
AM General M151A2
Austin Champ
Re: Rear lights. Wire color coded
No colored wires in factory harness. You will need to check the front end and see what wire attaches to each of those at that end. Or put in a new rear harness. Or just use a test light or meter on each wire and turn the light on and check each in turn till you find the right one.
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
Re: Rear lights. Wire color coded
That is what I thought...However The female ends have numbers, just not the male ends.
Thanks.
Thanks.
-
- Brigadier General
- Posts: 2607
- Joined: December 9th, 2007, 10:49 am
- Location: ~ Heaven ~
Re: Rear lights. Wire color coded
Someone probably rewired the lights .
The wires should all be black rubber wire.
As Rick said get a test light and start ringing out things.
Just note what light goes on with each wire.
Then get the wiring diagram and connect them accordinally.
Hope that makes sense.
Fil Bonica
The wires should all be black rubber wire.
As Rick said get a test light and start ringing out things.
Just note what light goes on with each wire.
Then get the wiring diagram and connect them accordinally.
Hope that makes sense.
Fil Bonica
K1ABW
Re: Rear lights. Wire color coded
Get a circuit tester and hook it up to each wire. Remember, when selecting a circuit tester, you're dealing with 24v. Harbor freight has an inexpensive set of three - one for up to 15v, one for 16-24v and a third tester with its own power source. They're not of high quality but you cannot beat the price. With that kit, you should have your curious wiring figured out in minutes.
-
- Sergeant First Class
- Posts: 200
- Joined: December 23rd, 2013, 11:35 pm
- Location: far----far northwest Missouri
Re: Rear lights. Wire color coded
By any chance is this a newer LED military light? I have seen a few that were color coded as well as having sticker like numbers on them. I can't find mine right now to compare with.
Still crazy after all these years.
The OD bug bit me in 1970......and I have never been the same
The OD bug bit me in 1970......and I have never been the same
Re: Rear lights. Wire color coded
No, this was one butchered (wire wise) 62 Mutt when I got it. Ain't nothing "new" on it lol.old dodge guy wrote:By any chance is this a newer LED military light? I have seen a few that were color coded as well as having sticker like numbers on them. I can't find mine right now to compare with.