Brake wheel cylinders springs
Moderators: rickf, raymond, Mr. Recovery
Brake wheel cylinders springs
I bought several of these and the they came with springs ? Any ideas why ?
Re: Brake wheel cylinders springs
No pic. What exactly did you buy?
Re: Brake wheel cylinders springs
I'm watching my email but see nothing from you.
-
- Brigadier General
- Posts: 2506
- Joined: October 1st, 2010, 12:19 am
- Location: El Dorado, Arkansas
Re: Brake wheel cylinders springs
You can post pics direct from your computer now.
viewtopic.php?f=2&t=12598
viewtopic.php?f=2&t=12598
Re: Brake wheel cylinders springs
To send an email, click on the 'Contact' button below the recipient's avatar.
Click on the 'Envelope" button in the dropdown box.
From the new window you can send an email to the recipient.
Be sure to add a title in the subject line. Many spam filters will grab emails with an empty subject line.
Cheers,
TJ
Click on the 'Envelope" button in the dropdown box.
From the new window you can send an email to the recipient.
Be sure to add a title in the subject line. Many spam filters will grab emails with an empty subject line.
Cheers,
TJ
Re: Brake wheel cylinders springs
The springs go inside the brake wheel cylinder
mark
1968 m274A5
1960 m151
1981 m151A2
1964 m416
1971 m416
1968 m274A5
1960 m151
1981 m151A2
1964 m416
1971 m416
Re: Brake wheel cylinders springs
https://i.postimg.cc/6QXP98dK/Scan-36.jpg here a pic
mark
1968 m274A5
1960 m151
1981 m151A2
1964 m416
1971 m416
1968 m274A5
1960 m151
1981 m151A2
1964 m416
1971 m416
Re: Brake wheel cylinders springs
Michael....
if the spring looks like the one in this picture, then it goes in the cylinder between the two seals and pistons. If you purchased a new wheel cylinder, I'm surprised that the spring (and presumably the pistons and seals) were disassembled.
And don't forget..... there are different sizes of wheel cylinders depending on what model you have:-
M151 and M151A1 have 3/4" cylinders front and rear.
M151A2 models have 3/4" rear cylinders but have 1" cylinders on the front.
Don't mix and match them.
Ken
if the spring looks like the one in this picture, then it goes in the cylinder between the two seals and pistons. If you purchased a new wheel cylinder, I'm surprised that the spring (and presumably the pistons and seals) were disassembled.
And don't forget..... there are different sizes of wheel cylinders depending on what model you have:-
M151 and M151A1 have 3/4" cylinders front and rear.
M151A2 models have 3/4" rear cylinders but have 1" cylinders on the front.
Don't mix and match them.
Ken
Kind regards....
Ken
Always wanted - Details and pictures of M416 Trailer data plates & M151 data plates & body-tags for my research. Thanks!
Contact address - - muttguru@aol.com
Note for 2023..... Ken..."Less Stress - More Exercise!"
Ken
Always wanted - Details and pictures of M416 Trailer data plates & M151 data plates & body-tags for my research. Thanks!
Contact address - - muttguru@aol.com
Note for 2023..... Ken..."Less Stress - More Exercise!"
Re: Brake wheel cylinders springs
Thanks Ken, I am surprised they did not assemble them already. When I revisit the shop next, I will see look at them better.
Cheerio
Cheerio