brake line rear connector

[Jerome]

Hi,

Would someone have a pic of the rear 3 way brake line connector 'connector, multiple, fluid pressure line' #11639776? I have a doubt about the one the vendor sent me... and I am far away from my Mutt.
A pic from underneath the truck would do

Thanks,

Jerome

[rupert's]

Hello, you can see it here ...
https://kemper-parts.com/en/ford-mutt-m ... acket-rear
Un saludo

[rickf]

If I remember correctly the A1 and A2 use a different block. The mount is different I believe.

[Mark]

Screen Shot 2021-07-03 at 4.09.11 PM.png

Ok not a very good pic, I'll get a rag/brake cleaner to clean it up, this is like a Tee connection?Aw, I'll delete this pic in a few minutes

[Mark]

M151A2 rear 3 way brake junction point.png

Here's a better pic

[muttguru]

Here's another shot.... not mine but clear enough.....

Ken

[rickf]

That looks like the A1/straight 151 connector. You can see it is different from the link Rupert sent which is probably an A2.
Just as an aside, in Kens picture is a perfect reason why I hate undercoating. See the rust hiding under the undercoating at the edges of the panels? I guarantee it goes a lot further than that under the coating. With pant you would see it right away and exactly where it is.

[Jerome]

Thanks guys - That's what I thought: I got the wrong one from KP... Will not fit on my old M151.