m416 vs M100 wheels
Moderators: rickf, raymond, Mr. Recovery
-
- Sergeant First Class
- Posts: 258
- Joined: January 17th, 2016, 5:38 pm
- Location: Reading (Boston) Mass
m416 vs M100 wheels
I have a eye on a M100 and a M416 trailer. However they will need to be towed about 100 miles home. When I have retrieved other M416 trailers i bring two spare tires, air compressor, jack and hand tools. Does the m416 wheel fit a M100? Or what size Uhaul trailer hold two trailers. I want to bring back the trailers in one trip. I have a second pickup if needed but that just ads gas money.
Thanks
Bruce
Thanks
Bruce
Re: m416 vs M100 wheels
The 416 uses flat bottom lug nuts and the 100 uses tapered lug nuts so the wheels are different. I believe the hole pattern is the same but not positive. I can go out and measure my 100 and 416 tomorrow if you need that info.
If you have enough manpower you can flip one trailer upside down on top of the other one and lash them together. Bring a few 2x4's to put between the beds.
If you have enough manpower you can flip one trailer upside down on top of the other one and lash them together. Bring a few 2x4's to put between the beds.
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
- Mr. Recovery
- Brigadier General
- Posts: 2901
- Joined: December 5th, 2007, 9:03 pm
- Location: New Port Richey, Fl.
- Contact:
Re: m416 vs M100 wheels
I hulled 2 from Florida. to the Dalles Fort Worth area in my trailer I think it's 6X10.
Not my photo, just for reference.
You do not have the required permissions to view the files attached to this post.
1960 M151 Run 1
1963 M151 Willys DoD 10-63 in Baltimore
1989 Alley Cat. "work in Progress"
NRA Life Member
American Legion Post 275 Fl
US Army 6 years 2nd Armored Cavalry Bindlach Germany
Colorado Army Nat. Guard 5 years
Md Air Guard 15 years active duty on C-130's
1963 M151 Willys DoD 10-63 in Baltimore
1989 Alley Cat. "work in Progress"
NRA Life Member
American Legion Post 275 Fl
US Army 6 years 2nd Armored Cavalry Bindlach Germany
Colorado Army Nat. Guard 5 years
Md Air Guard 15 years active duty on C-130's
-
- Sergeant First Class
- Posts: 258
- Joined: January 17th, 2016, 5:38 pm
- Location: Reading (Boston) Mass
Re: m416 vs M100 wheels
thanks for the reply. i think i could use the existing lug nuts but i will bring a few. I rented a U-Haul for two trailers a few years ago but the ramp was not full width so the would not slide in. Luckily the town had a loader and lifted them over the side into position. i love the idea of stacking them but at 74 i do not have the power to tip them on top of each other.
Re: m416 vs M100 wheels
Hmm. Those two trailers look VERY familiar. Problem is, Mr. Recovery had the benefit of having one trailer there without a tub on it so, 6x10 would be darned near impossible for two trailers with tubs. However, turned sideways, with their tongues in the air, or with tongues removed altogether (or both) that would probably do it very nicely.Mr. Recovery wrote: ↑April 30th, 2024, 10:16 pm
I hulled 2 from Florida. to the Dalles Fort Worth area in my trailer I think it's 6X10.
20181031_152134.jpg 20181104_211420.jpg
Cheers,
TJ
Re: m416 vs M100 wheels
i have owned both types, so i want to remind you that the M100 has one side with right hand thread and one side with left hand thread. the old saying was "tighten to the front, loosen to the rear".
You do not have the required permissions to view the files attached to this post.
Re: m416 vs M100 wheels
Yea, driving those two pickups at one can be a real chore. But remember, we have AI now so maybe you can get one of the trucks to just follow the other?Redlight wrote: ↑April 30th, 2024, 5:58 pmI have a eye on a M100 and a M416 trailer. However they will need to be towed about 100 miles home. When I have retrieved other M416 trailers i bring two spare tires, air compressor, jack and hand tools. Does the m416 wheel fit a M100? Or what size Uhaul trailer hold two trailers. I want to bring back the trailers in one trip. I have a second pickup if needed but that just ads gas money.
Thanks
Bruce
I will go out and measure the hole pattern after docs visit this morning.
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
Re: m416 vs M100 wheels
The M100's wheel is the same as the jeep that was called upon to pull it.
Re: m416 vs M100 wheels
Well, The M38A1 is 5 1/2 on 5 but for some reason I think the 151 is off by just a hair. I will go out and check in just a few minutes.
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
Re: m416 vs M100 wheels
Both the 100 and the 416 have 5 on 5 1/2 bolt patterns. I actually have the spare tire from my CJ-7 on my M100 trailer. But using a m151 rim may not work on the 100 due to the large hubs on the 100. You are best off taking a spare tire from a Ford pickup for that trailer. Make sure it is an older rim with the 5 on 5 1/2 pattern.
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone