Carburetor offered by Milplus

sarmadq · Unread post by **sarmadq** » April 27th, 2009, 2:06 pm

Hi all,

I wanted to know if anyone has tried out the carburetor offered by Milplus, based in Italy. They claim to have a remanufactred carb with an improved nozzle, which in return gives you "low fuel consumption, no troubles in low gears & hiccups at cold starts"

The NOS ones offered by TNJMURRAY are $255 (Euro 195) where as this one by Milplus is 380 euros ($499). We are talking about a $244 difference here

, just a bit less in getting another one for a spare and I think John would give 2 in $499

baios · Unread post by **baios** » April 27th, 2009, 2:10 pm

There is a post in the past for that Mil-plus carb!!!Just make a search and U will see!!!I think the price is too high for that carb

sarmadq · Unread post by **sarmadq** » April 27th, 2009, 2:13 pm

Thanks, that's what I thought too about the price.
Sorry all, I just posted away without conducting a prior search.

Floyd · Unread post by **Floyd** » April 27th, 2009, 4:04 pm

Sam: Here's a post by Horst about the Milplus carb.

Horst wrote:I have tried the modified venturi from Mil-plus. I had posted pictures of it. Waste of money.

Floyd

Rainman · Unread post by **Rainman** » April 27th, 2009, 5:33 pm

Hey Sam,

If we all did searches before we asked a question, nobody would be posting in the tech forum. Rick has answered every question at least twice on the old board, and has a good start getting to all of them here too.

No apology necessary, your among friends.

Rainman

Unread post by **rickf** » April 27th, 2009, 7:10 pm

Beat me to it, I just got home. The Mil plus carb is not worth the money by a long shot.

Rick

Ralph Fuller · Unread post by **Ralph Fuller** » April 27th, 2009, 9:55 pm

Sam: You don't have to apologize for asking any question on this board. We are here to learn, have fun and not worry about if we spelled a word right.

sarmadq · Unread post by **sarmadq** » April 27th, 2009, 10:10 pm

Thanks guys, this really is a life ($) saver

Markcos · Unread post by **Markcos** » April 28th, 2009, 2:16 am

hey use a 1/16 th drill bit on the mane metering jet in the carb , and you will have the same carb as that euro one

svramselaar · Unread post by **svramselaar** » April 28th, 2009, 4:35 am

hello

if you have a old carburetor take it apart and clean it with a ultrasound device and put a new big kit in it
this works and is a lot cheaper
part nr 5704523 big $ 60.00

TNJ Murray better than $225.00 for a new one

only it is "original" to set the choke valve not complete open
i get more satisfaction if i repair it as tad i put new parts on my mutt

greetings
george

sherwan_88 · Unread post by **sherwan_88** » April 28th, 2009, 6:44 am

Sam,
the guy in Kharian has a bunch of NOS carbs, if you are looking for a spare, i can get you one if you want it.

Carburetor offered by Milplus

Carburetor offered by Milplus

Re: Carburetor offered by Milplus

Re: Carburetor offered by Milplus

Re: Carburetor offered by Milplus

Re: Carburetor offered by Milplus

Re: Carburetor offered by Milplus

Re: Carburetor offered by Milplus

Re: Carburetor offered by Milplus

Re: Carburetor offered by Milplus

Re: Carburetor offered by Milplus

Re: Carburetor offered by Milplus