TM 9-2320-218-34-1 Question???

This is the place to get help with technical matters concerning your M151 jeep

Moderators: rickf, raymond, Mr. Recovery

Post Reply
Cobra5
Colonel
Colonel
Posts: 1528
Joined: December 5th, 2007, 11:10 pm
Location: Stevensville, Montana

TM 9-2320-218-34-1 Question???

Unread post by Cobra5 » January 1st, 2008, 2:06 pm

I'm going nuts!!!!!!! I have this manual on PDF and it appears I'm missing a few pages. I'm reinstalling the bellhousing and gear box to the engine. At the bottom of page 3-12 in the follow on task section it refers me back to para 2-12 for the transmission/ transfer reinstall. My problem is the copy I have ends at para 2-11, page 2-39. Looking through the index it seems I maybe missing pages 2-40 - 2-46.

ROB974
Private First Class
Private First Class
Posts: 10
Joined: December 17th, 2007, 8:29 pm
Location: Northern Illinois
Contact:

Unread post by ROB974 » January 1st, 2008, 2:31 pm

I have the same thing (page 2-39 then into chapter 3).

Cobra5
Colonel
Colonel
Posts: 1528
Joined: December 5th, 2007, 11:10 pm
Location: Stevensville, Montana

Unread post by Cobra5 » January 1st, 2008, 2:54 pm

Rob,

Is yours a PDF or paper copy? I just checked this website http://www.pedros.cz/ the manual on this site is also incomplete.

Tim

ROB974
Private First Class
Private First Class
Posts: 10
Joined: December 17th, 2007, 8:29 pm
Location: Northern Illinois
Contact:

Unread post by ROB974 » January 1st, 2008, 2:58 pm

Tim, that is where I found my copy...... There is a surplus store not far from where I live, and they may have an original printing of the TM. I previously asked about it & they were asking $60.00 for it...

Cobra5
Colonel
Colonel
Posts: 1528
Joined: December 5th, 2007, 11:10 pm
Location: Stevensville, Montana

Unread post by Cobra5 » January 1st, 2008, 3:07 pm

Rob,

I got my copy from someone on the other board.

Anyone out there have a paper copy they can check to see if they are missing these pages?

Tim

User avatar
Horst
Colonel
Colonel
Posts: 1956
Joined: December 9th, 2007, 6:21 am
Location: Munich, Germany

Unread post by Horst » January 1st, 2008, 3:20 pm

Tim,

Yes, you are missing the pages until 2-47. I have a pdf. I am not sure if I can extract the pages from the document, but I will try later today.
Horst

1972 USMC M151A2 w/ROPS (ex Barstow) and M416
1962 M201 and trailer
1966 GTO,1982 E350 Skoolie, 1987 SJ413, 1987 911
Gone: 2xM35A2c, Unimog 404S, Hanomag AL28, DKW Munga

Cobra5
Colonel
Colonel
Posts: 1528
Joined: December 5th, 2007, 11:10 pm
Location: Stevensville, Montana

Unread post by Cobra5 » January 1st, 2008, 3:27 pm

Horst,

Thanks! It figures I'm trying to get this engine together and I'm stopped by this problem. I was going to get online and buy the PDF but now I'm not sure because you never know what your going to get. Once I get this restore done, I'm going to spend the money and get the paper versions. Still too much money going out for parts.

Tim

User avatar
Rainman
Brigadier General
Brigadier General
Posts: 2398
Joined: November 28th, 2007, 12:32 am

missing pages

Unread post by Rainman » January 1st, 2008, 3:42 pm

m-11

I have a treeware version at home, I'll check as soon as I arrive there, later this evening.

Rainman
M151 World Land Speed Record Holder

User avatar
Horst
Colonel
Colonel
Posts: 1956
Joined: December 9th, 2007, 6:21 am
Location: Munich, Germany

Unread post by Horst » January 1st, 2008, 4:57 pm

Tim,

Well, I was afraid of that. The pdf is locked and I cannot extract pages. Sounds like you want those pages urgent, so what I can do is printing the missing pages and then faxing them over to you. Just send me your fax number via email . Then later on you can find a real solution if still needed.
Last edited by Horst on December 9th, 2014, 5:56 pm, edited 1 time in total.
Horst

1972 USMC M151A2 w/ROPS (ex Barstow) and M416
1962 M201 and trailer
1966 GTO,1982 E350 Skoolie, 1987 SJ413, 1987 911
Gone: 2xM35A2c, Unimog 404S, Hanomag AL28, DKW Munga

Cobra5
Colonel
Colonel
Posts: 1528
Joined: December 5th, 2007, 11:10 pm
Location: Stevensville, Montana

Unread post by Cobra5 » January 1st, 2008, 11:45 pm

Horst,

Thanks for the offer but I finally put the transmission and engine together. No more crisis. :D

Tim

Post Reply