Pre & post emissions

This is the place to get help with technical matters concerning your M151 jeep

Moderators: rickf, raymond, Mr. Recovery

Post Reply
Cobra5
Colonel
Colonel
Posts: 1528
Joined: December 5th, 2007, 11:10 pm
Location: Stevensville, Montana

Pre & post emissions

Unread post by Cobra5 » January 27th, 2008, 4:43 pm

Hey guys,

I've been going through some photos and noticed a difference between A-2's. Not sure if this is due to emissions or fording mods. Anyway, looking at the end of the master cylinder that sticks through the firewall. Mine has a hard line coming out the back. Other earlier models don't have this line. What's the deal?

Tim

moose53
Site Admin
Site Admin
Posts: 2640
Joined: November 25th, 2007, 8:44 pm
Location: Moscow PA
Contact:

Unread post by moose53 » January 27th, 2008, 6:08 pm

wheres the line go Tim? if it goes to the air cleaner its a vent line for the brakes.

Jim
Zigzag50, Northeast51, KC2QDZ
MVPA # 30032 G838.org

--------------------------------------
1971 G838-M151A2 1966 G857-M416
1968 G748-M101A1 1976 G748-M116A1
1990 MEP-701A

--------------------------------------
Real jeeps have horizontal grille slots

User avatar
Horst
Colonel
Colonel
Posts: 1962
Joined: December 9th, 2007, 6:21 am
Location: Munich, Germany

Unread post by Horst » January 27th, 2008, 9:36 pm

that is part of the fording kit. Non fording kit equipped jeeps have a simple cap with a breather hole.
Horst

1972 USMC M151A2 w/ROPS (ex Barstow) and M416
1962 M201 and trailer
1966 GTO,1982 E350 Skoolie, 1987 SJ413, 1987 911
Gone: 2xM35A2c, Unimog 404S, Hanomag AL28, DKW Munga

Cobra5
Colonel
Colonel
Posts: 1528
Joined: December 5th, 2007, 11:10 pm
Location: Stevensville, Montana

Unread post by Cobra5 » January 27th, 2008, 11:13 pm

Moose,
The line goes to the air cleaner.

Horst,
I thought it was part of the fording kit. Mine has the fording kit installed and the others without the fording kit have just the cap. Of course the year differences made me beleive that it could be part of the emissions.

Tim

Floyd
Captain
Captain
Posts: 1043
Joined: December 6th, 2007, 11:26 am
Location: Oak Hills, CA

Unread post by Floyd » January 28th, 2008, 12:59 pm

Tim: If this is what you are talking about? It's part of the fording system. I would consider this the front of the m/c and you seem to be asking about a line in back?

Image

Floyd
1961 M151
1967 M416
1988 M35A2C
VFW Life Member
NRA Life Member

Cobra5
Colonel
Colonel
Posts: 1528
Joined: December 5th, 2007, 11:10 pm
Location: Stevensville, Montana

Unread post by Cobra5 » January 28th, 2008, 1:09 pm

Floyd,

That's what I'm talking about. Now I know it is part of the fording system.

Thanks!

Tim

Post Reply