A Danish conversion project
Moderators: rickf, raymond, Mr. Recovery
-
- Private First Class
- Posts: 12
- Joined: October 31st, 2010, 3:23 pm
- Location: Denmark
- Contact:
A Danish conversion project
I really enjoy this fantastic website. Incredibly good info here and I a love especially "M151 Mods"
I would like to share some pictures of my M151 A1 from the Danish military in 1968. in 1977 was it bought out by the armye. The last 22 years it stood on a farm, deep out in the countryside. Now I have completely restored the car.
The car will be used for off-road and is therefore changed.
Some of the details:
2 "pipe all the way around the perimeter, which is connected to the stiles.
1 "pipe in the inner edge of the A pillar
Canopy connected to my 2 "pipe and stiles
And other small changes
A new engine and gearbox on the way
I'm going in the future:
Dream of building EFI injection on the engine from a European Opel Omega A 2.4
M151 Differential Lock Kit (But requires a small fortune whit Mil Plus, sow cant afford it at the time)
6-point rollbar
But I will keep you posted
And I apologize for my English is not too good but I hope is understandable.
Sincerely Schroder
Found it like that in a old barn. Neede some work..
PAint it out side
I would like to share some pictures of my M151 A1 from the Danish military in 1968. in 1977 was it bought out by the armye. The last 22 years it stood on a farm, deep out in the countryside. Now I have completely restored the car.
The car will be used for off-road and is therefore changed.
Some of the details:
2 "pipe all the way around the perimeter, which is connected to the stiles.
1 "pipe in the inner edge of the A pillar
Canopy connected to my 2 "pipe and stiles
And other small changes
A new engine and gearbox on the way
I'm going in the future:
Dream of building EFI injection on the engine from a European Opel Omega A 2.4
M151 Differential Lock Kit (But requires a small fortune whit Mil Plus, sow cant afford it at the time)
6-point rollbar
But I will keep you posted
And I apologize for my English is not too good but I hope is understandable.
Sincerely Schroder
Found it like that in a old barn. Neede some work..
PAint it out side
Last edited by Schroder on December 3rd, 2010, 7:01 am, edited 3 times in total.
-
- Major
- Posts: 1174
- Joined: February 24th, 2009, 2:17 pm
- Location: Sialkot, Pakistan.
Re: A Danish conversion project
Welcome to the Forum Schroder.
A Nice mutt you got there, i like how you have extended the whole fender wells to accommodate the large tires.
Do you still have the original engine and gearbox in it?
A Nice mutt you got there, i like how you have extended the whole fender wells to accommodate the large tires.
Do you still have the original engine and gearbox in it?
Sherwan
1982 M825 (Former)
Muttless at the moment.
The Last Of Its Kind. A Ton Of American Steel.
1982 M825 (Former)
Muttless at the moment.
The Last Of Its Kind. A Ton Of American Steel.
-
- Private First Class
- Posts: 12
- Joined: October 31st, 2010, 3:23 pm
- Location: Denmark
- Contact:
Re: A Danish conversion project
Thanks
Yes, extended 8 cementers whit springs from a mercedes and then had to move the shock absorber. Cutting and enhance bear arms to get the right angle again. Think it's been good and not gone and impaired driving characteristics.
Yes, it is the original engine and gearbox, have not found a god replacement. (yet
I have been looking for engine and gearbox, to replace, but then I have to replace diff to.
Any suggestions?
I think that a engine with a larger capacity would overburden the drivetrain sitting in the car originally.
But having considered the engine and gearbox from a Mercedes GD 300, with 5 speed and reduction gear.
Yes, extended 8 cementers whit springs from a mercedes and then had to move the shock absorber. Cutting and enhance bear arms to get the right angle again. Think it's been good and not gone and impaired driving characteristics.
Yes, it is the original engine and gearbox, have not found a god replacement. (yet
I have been looking for engine and gearbox, to replace, but then I have to replace diff to.
Any suggestions?
I think that a engine with a larger capacity would overburden the drivetrain sitting in the car originally.
But having considered the engine and gearbox from a Mercedes GD 300, with 5 speed and reduction gear.
-
- 1st Sergeant
- Posts: 446
- Joined: February 7th, 2010, 3:59 pm
- Location: Tucson, AZ
Re: A Danish conversion project
Well, you sure did a good job saving it from a life rusting in a barn!
Welcome aboard!
Jeff
Welcome aboard!
Jeff
11 yrs Army NG, currently full time AH-64D Apache Longbow crewchief
Former 11B, 32 IN BDE, WIARNG "RED ARROW!" OIF 3 2005-2006
General know it all jerk 42 years and running.
SOLD 1971 AM General M151A2
SOLD 1966 USMC M416
-
- Major
- Posts: 1174
- Joined: February 24th, 2009, 2:17 pm
- Location: Sialkot, Pakistan.
Re: A Danish conversion project
A complete Drivetrain out of a G-Wagen would be bulletproof in a mutt. You'd get central locking and independent diff locks as well. Sadly in our part of the world we don't have any G-Wagen's. Over here the best package is out of a First/Second Generation Toyota 4Runner/Surf.Schroder wrote:Thanks
Yes, extended 8 cementers whit springs from a mercedes and then had to move the shock absorber. Cutting and enhance bear arms to get the right angle again. Think it's been good and not gone and impaired driving characteristics.
Yes, it is the original engine and gearbox, have not found a god replacement. (yet
I have been looking for engine and gearbox, to replace, but then I have to replace diff to.
Any suggestions?
I think that a engine with a larger capacity would overburden the drivetrain sitting in the car originally.
But having considered the engine and gearbox from a Mercedes GD 300, with 5 speed and reduction gear.
Have you updated the brakes? or still original?
Sherwan
1982 M825 (Former)
Muttless at the moment.
The Last Of Its Kind. A Ton Of American Steel.
1982 M825 (Former)
Muttless at the moment.
The Last Of Its Kind. A Ton Of American Steel.
-
- Colonel
- Posts: 1654
- Joined: November 26th, 2007, 7:44 am
- Location: ~Heaven~
Re: A Danish conversion project
Great pictures and your English is better than mine. I especially like your 2" perimeter extensions
Ralph
1967 M151A1
1967 M151A1
1967 M416
1947 Bantam TC-3 trailer
If The Phone Don't Ring ... You'll Know It's Me
Airborne Ranger CIB Vietnam
1967 M151A1
1967 M151A1
1967 M416
1947 Bantam TC-3 trailer
If The Phone Don't Ring ... You'll Know It's Me
Airborne Ranger CIB Vietnam
-
- Private First Class
- Posts: 12
- Joined: October 31st, 2010, 3:23 pm
- Location: Denmark
- Contact:
Re: A Danish conversion project
Thanks
No, my brakes are still original, have not found any replacement for them. Cant afford from Mill Plus, sow any other way to make them? From a Suzuki?
Yer, I love the GD 240, we still have them in the Danish army, and they don’t wound to die .. Germany when they are best, the same whit the old MG3/MG42…
No, my brakes are still original, have not found any replacement for them. Cant afford from Mill Plus, sow any other way to make them? From a Suzuki?
Yer, I love the GD 240, we still have them in the Danish army, and they don’t wound to die .. Germany when they are best, the same whit the old MG3/MG42…
-
- Major
- Posts: 1174
- Joined: February 24th, 2009, 2:17 pm
- Location: Sialkot, Pakistan.
Re: A Danish conversion project
Yes, the Milplus brakes are just too expensive. I did a self modification for a fraction of that.
Here is the link.
http://g838.org/viewtopic.php?f=4&t=2968&st=0&sk=t&sd=a
See page 1 and 3.
Here is the link.
http://g838.org/viewtopic.php?f=4&t=2968&st=0&sk=t&sd=a
See page 1 and 3.
Sherwan
1982 M825 (Former)
Muttless at the moment.
The Last Of Its Kind. A Ton Of American Steel.
1982 M825 (Former)
Muttless at the moment.
The Last Of Its Kind. A Ton Of American Steel.
-
- Private First Class
- Posts: 12
- Joined: October 31st, 2010, 3:23 pm
- Location: Denmark
- Contact:
Re: A Danish conversion project
Thanks Sherwan
Rally nice work you have done on your A2.. Love the diesel engine, which car is it from?
I will try the same as you whit the brakes.. Is there any thing I have to know, before I make front and rear adapters plates?
You can make a lots of front and rear adapters plates, and earn some.. I would buy from you
Rally nice work you have done on your A2.. Love the diesel engine, which car is it from?
I will try the same as you whit the brakes.. Is there any thing I have to know, before I make front and rear adapters plates?
You can make a lots of front and rear adapters plates, and earn some.. I would buy from you
-
- Private First Class
- Posts: 12
- Joined: October 31st, 2010, 3:23 pm
- Location: Denmark
- Contact:
Re: A Danish conversion project
Is there anyone who has manufactured or otherwise, could make a diff lock kit itself?
Would love to buy one from MilPlus but 1200euro for each diff complete, is simply too much for me .. Although it really looks nice..
Hope there is someone who has found a better solution?
I would also like a second gear box, and one with a reduction gear.? I have looked at different car gearboxes, but all with a displacement of the shaft output of the gearbox. Jeeps shaft end go out just below the middle, not to come to a sharp angle from the gearbox to the diff.
I know it's many questions, but really wants to improve my jeep so I can use it to great climbing, ...
Would love to buy one from MilPlus but 1200euro for each diff complete, is simply too much for me .. Although it really looks nice..
Hope there is someone who has found a better solution?
I would also like a second gear box, and one with a reduction gear.? I have looked at different car gearboxes, but all with a displacement of the shaft output of the gearbox. Jeeps shaft end go out just below the middle, not to come to a sharp angle from the gearbox to the diff.
I know it's many questions, but really wants to improve my jeep so I can use it to great climbing, ...
-
- Private First Class
- Posts: 12
- Joined: October 31st, 2010, 3:23 pm
- Location: Denmark
- Contact:
Re: A Danish conversion project
No help yet..
Re: A Danish conversion project
I know a lot of transfer cases can be clocked, that is the case can be rotated to reposition the outputs. The problem would be ground clearance if you turn the case so both shafts exit in the middle.
If you are only using the vehicle off road you can get an extra set of differentials and weld the spider gears, that would lock the two wheels together. On road it would wear the tires quickly though.
Rick
If you are only using the vehicle off road you can get an extra set of differentials and weld the spider gears, that would lock the two wheels together. On road it would wear the tires quickly though.
Rick
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
Re: A Danish conversion project
here is a locking differential. German text says it comes without the shorter drive shaft it would need on one side (I have nothing to do with that offer). I don't know but it could be a differential build by Mutt Perini.
http://www.army-inserate.de/ad1771.htm
http://www.army-inserate.de/ad1771.htm
Horst
1972 USMC M151A2 w/ROPS (ex Barstow) and M416
1962 M201 and trailer
1966 GTO,1982 E350 Skoolie, 1987 SJ413, 1987 911
Gone: 2xM35A2c, Unimog 404S, Hanomag AL28, DKW Munga
1972 USMC M151A2 w/ROPS (ex Barstow) and M416
1962 M201 and trailer
1966 GTO,1982 E350 Skoolie, 1987 SJ413, 1987 911
Gone: 2xM35A2c, Unimog 404S, Hanomag AL28, DKW Munga
-
- Private First Class
- Posts: 12
- Joined: October 31st, 2010, 3:23 pm
- Location: Denmark
- Contact:
Re: A Danish conversion project
I want a diff lock which can be turned off and on. So to weld it, I do not think is a good idea.
I have enough to save up for a MillPlus set.
I have made contact with this German owner, who sells his lock kit, but unfortunately it is only 1 diff. But it's a start ..
As for clutch for toyota 2c engine to the original gearbox, which is used? there are some who have pictures of this building?
Send to nschroder@hotmail.com
Thanks
I have enough to save up for a MillPlus set.
I have made contact with this German owner, who sells his lock kit, but unfortunately it is only 1 diff. But it's a start ..
As for clutch for toyota 2c engine to the original gearbox, which is used? there are some who have pictures of this building?
Send to nschroder@hotmail.com
Thanks
-
- Major
- Posts: 1174
- Joined: February 24th, 2009, 2:17 pm
- Location: Sialkot, Pakistan.
Re: A Danish conversion project
Hi Schroder,
Sorry for the late reply. Here is a link to a album which contains pictures of the modifications regarding the engine, transmission and brakes.
http://s610.photobucket.com/albums/tt18 ... 1QQtppZZ20
As for the mating of the 2C to the M151 gearbox, i used the the original clutch plate from the mutt engine. While the bell housing, fly wheel, pressure plate, clutch fork, bearing, and a pilot bearing all of the Toyota 2C.
Sorry for the late reply. Here is a link to a album which contains pictures of the modifications regarding the engine, transmission and brakes.
http://s610.photobucket.com/albums/tt18 ... 1QQtppZZ20
As for the mating of the 2C to the M151 gearbox, i used the the original clutch plate from the mutt engine. While the bell housing, fly wheel, pressure plate, clutch fork, bearing, and a pilot bearing all of the Toyota 2C.
Sherwan
1982 M825 (Former)
Muttless at the moment.
The Last Of Its Kind. A Ton Of American Steel.
1982 M825 (Former)
Muttless at the moment.
The Last Of Its Kind. A Ton Of American Steel.