question on fording kit

199th mp · Unread post by **199th mp** » November 26th, 2010, 9:08 am

am considering removing the fording kit--once the intake tube is off, what parts would i need to find and install on the air cleaner in order for it to work properly?

Unread post by **rickf** » November 26th, 2010, 9:27 am

Just the cap off of the fording intake. That is the cap that was originally on the air cleaner if I remember correctly.

Rick

Ralph Fuller · Unread post by **Ralph Fuller** » November 26th, 2010, 10:56 am

Rick is right about using the cap off of the fording kit.....of course.

salt6 · Unread post by **salt6** » November 26th, 2010, 1:48 pm

Don't forget the end of the tailpipe. And probably a new gasket for it with new hardware.

Ralph Fuller · Unread post by **Ralph Fuller** » November 26th, 2010, 9:09 pm

Saturn Surplus has tail pipe tips or $12
http://www.saturnsurplus.com/m151/m151.htm
Rapco $15
http://www.rapcoparts.com/04exhaust151.html
TNJ Murray $22
http://www.tnjmurray.com/m151.cfm

199th mp · Unread post by **199th mp** » November 27th, 2010, 10:59 am

thanks guys--i still have the tailpipe tip--i will probably need a new gasket if i decide to remove it--i don't have the fording valve or handle, and the hand throttle isn't connected--i can't see an instance where i would seriously need the fording kit, but if i remove it i will keep it in case i ever find the rest of the parts and want to re-install the whole thing.

question on fording kit

question on fording kit

Re: question on fording kit

Re: question on fording kit

Re: question on fording kit

Re: question on fording kit

Re: question on fording kit