After 3 years of thinking about it and doing other things, I'm getting close to installing a 6 station Vic 1 intercom system in the boat along with an AN/VRC-47 setup.
450 HP worth of diesels is very loud!
I've been accumulating components, but now it's crunch time cable wise. I'm not ready to go the high dollar ebay route yet.
Specifically, I need a proper power cable from batts to the MX7777 Supressor. I have the cable from the MX7777 to the MT 1029 mount on radio A and the cable from radio A to radio B. Also have all of the cables from radios to antennas. Am 1780 and all control boxes in hand as well as headsets.
The MX 7777 power cable can be a CX 10613 or any cable with the appropriate end (or just the end plug. same shape and size as the CX 4720. 4 female with MALE center screw).
Also need an assortment (10 total) of CX 4723 cables ranging from 2' to 30'. Fair Radio has some 2 footers, but the others seem to have dried up.
Vic 1 intercom for the PBR
Moderators: rickf, raymond, Mr. Recovery
- D Pizzoferrato
- Master Sergeant
- Posts: 349
- Joined: May 1st, 2010, 8:16 am
Vic 1 intercom for the PBR
Last edited by D Pizzoferrato on April 1st, 2013, 9:03 pm, edited 1 time in total.
Visit our Website! www.odcloth.com for your Canvas needs
Visit our AM151A2 restoration page http://www.odcloth.com/mymutt/1979am151a2.html
Visit our PBR Restoration Site. http://www.pbr6927.com
Visit our AM151A2 restoration page http://www.odcloth.com/mymutt/1979am151a2.html
Visit our PBR Restoration Site. http://www.pbr6927.com
Re: Vic 1 intercom for the PBR
Have you tried Bernie Matniak or Tony Banks?
PM sent with their numbers. I know Bernie had tons of odd cables, he is a pain to get hold of though.
PM sent with their numbers. I know Bernie had tons of odd cables, he is a pain to get hold of though.
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
- Jay Mallari
- 1st Lieutenant
- Posts: 931
- Joined: December 7th, 2007, 10:30 pm
- Location: Middlesex, England
Re: Vic 1 intercom for the PBR
Try Glen Closson. He charges $20 per cable (CX4723) but I'm sure he
will give you a discount especially if you are buying 10.
will give you a discount especially if you are buying 10.