Hi, i want to know where i can buy a new body for my m416, and also for a m100 from a friend??? Only the body and fenders. Thanks for your time!
Alvaro Martinez from Uruguay
New Body
Moderators: rickf, raymond, Mr. Recovery
Re: New Body
I have never seen new bodies for either of them. The M-100's have not been made since the 50's!
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
Re: New Body
Alvaro, Rick is correct. There are no new bodies for the M100 or the M416.
However, you can buy a new body for a Willys MB-T / Bantam trailer. This would be close to the M100 trailer BUT you would have to do the following:-
1. Cut an extra hole in the floor (the new trailer bodies have ONE drain fitting. The M100 has TWO) and fit an extra drain plug to the new hole.
2. Transfer the corner handles from an old M100 to the new body (the Willys & Bantam trailer bodies had NO corner handles).
3. Transfer the handbrake lever from an old M100 to the new body. (The handbrake lever is a different style).
It can be done but it helps if you have the old rusted M100 body....for parts.
Note: The Willys/Bantam trailer body is narrower than the M416 body, so it is not possible to do the same type of conversion....it will be too small for the chassis.
There are several dealers who sell the new Willys/Bantam bodies.
Ken
However, you can buy a new body for a Willys MB-T / Bantam trailer. This would be close to the M100 trailer BUT you would have to do the following:-
1. Cut an extra hole in the floor (the new trailer bodies have ONE drain fitting. The M100 has TWO) and fit an extra drain plug to the new hole.
2. Transfer the corner handles from an old M100 to the new body (the Willys & Bantam trailer bodies had NO corner handles).
3. Transfer the handbrake lever from an old M100 to the new body. (The handbrake lever is a different style).
It can be done but it helps if you have the old rusted M100 body....for parts.
Note: The Willys/Bantam trailer body is narrower than the M416 body, so it is not possible to do the same type of conversion....it will be too small for the chassis.
There are several dealers who sell the new Willys/Bantam bodies.
Ken
Kind regards....
Ken
Always wanted - Details and pictures of M416 Trailer data plates & M151 data plates & body-tags for my research. Thanks!
Contact address - - muttguru@aol.com
Note for 2023..... Ken..."Less Stress - More Exercise!"
Ken
Always wanted - Details and pictures of M416 Trailer data plates & M151 data plates & body-tags for my research. Thanks!
Contact address - - muttguru@aol.com
Note for 2023..... Ken..."Less Stress - More Exercise!"
- Jay Mallari
- 1st Lieutenant
- Posts: 931
- Joined: December 7th, 2007, 10:30 pm
- Location: Middlesex, England
Re: New Body
Try your luck with MD Juan They have M100 repro trailer tubs on their website.
http://mdjuan.com.ph/product-bulletins/
http://mdjuan.com.ph/product-bulletins/
Re: New Body
muttguru wrote:Alvaro, Rick is correct. There are no new bodies for the M100 or the M416. UPDATE. M.D. Juan now has M100 bodies listed as available.
However, you can buy a new body for a Willys MB-T / Bantam trailer. This would be close to the M100 trailer BUT you would have to do the following:-
1. Cut an extra hole in the floor (the new trailer bodies have ONE drain fitting. The M100 has TWO) and fit an extra drain plug to the new hole.
2. Transfer the corner handles from an old M100 to the new body (the Willys & Bantam trailer bodies had NO corner handles).
3. Transfer the handbrake lever from an old M100 to the new body. (The handbrake lever is a different style).
It can be done but it helps if you have the old rusted M100 body....for parts.
Note: The Willys/Bantam trailer body is narrower than the M416 body, so it is not possible to do the same type of conversion....it will be too small for the chassis.
There are several dealers who sell the new Willys/Bantam bodies.
Ken
Kind regards....
Ken
Always wanted - Details and pictures of M416 Trailer data plates & M151 data plates & body-tags for my research. Thanks!
Contact address - - muttguru@aol.com
Note for 2023..... Ken..."Less Stress - More Exercise!"
Ken
Always wanted - Details and pictures of M416 Trailer data plates & M151 data plates & body-tags for my research. Thanks!
Contact address - - muttguru@aol.com
Note for 2023..... Ken..."Less Stress - More Exercise!"
Re: New Body
They also have trailer handles listed but as one of our members found out right at their plant that is not so. I would not hold out high hopes. And from past experience with M-38's the bodies may not be EXACT replicas.
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone