M151A1 in a "TAN" suit.......Got Tan Canvas?
Moderators: rickf, raymond, Mr. Recovery
-
- Private First Class
- Posts: 20
- Joined: June 11th, 2008, 6:37 pm
- Location: Albuquerque, NM
- Contact:
M151A1 in a "TAN" suit.......Got Tan Canvas?
M151A1 in a "TAN" suit
Anyone know where I can get some TAN CANVAS - not vinyl????????????????
Marked as: II Field Force VietNam HQs, HQs Battalion
Anyone know where I can get some TAN CANVAS - not vinyl????????????????
Marked as: II Field Force VietNam HQs, HQs Battalion
Re: M151A1 in a "TAN" suit.......Got Tan Canvas?
Nice! Looks odd with an A-2 winshield and grill especially with the studs on the grill for the front canvas on a desert vehicle. So are you a running an A-2 wire harness and that's the reason for the electric wipers or just because they are a better option? I've been thinking of doing the same on my A-1.
Re: M151A1 in a "TAN" suit.......Got Tan Canvas?
I have a friend that has an A1 that he's presently in the process of installing an A2 windshield on. Dan can you explain what you ran into with yours? Did you need new windshield brackets? His wiring is totally thrashed too and with A1 harnesses being so hard to find he's seriously considering, or should I say I am seriously considering for him, going with an A2 harness. He's already running an A2 motor. I'd appreciate any guidance you have on how to convert to the A2 windshield and electricals.
Oh and... your Mutt looks GREAT!!!!!
Oh and... your Mutt looks GREAT!!!!!
1992 Mercedes-Benz 250GD Wolf - Former German Army
St. Augustine, Florida
St. Augustine, Florida
-
- Brigadier General
- Posts: 2086
- Joined: July 20th, 2009, 11:49 pm
- Location: Va. Beach & NC Outer Banks
Re: M151A1 in a "TAN" suit.......Got Tan Canvas?
1976 M151A2 4 Color Cammo Mutt, aquired August 09
1976 or 7? M151A2 "Miss Sandy" Driver, aquired May 2010
Former owner M151A2 "Miss Saigon" Vietnam Rescue Sold Sept 09
Fond appreciation for the M151 Breed!!
1976 or 7? M151A2 "Miss Sandy" Driver, aquired May 2010
Former owner M151A2 "Miss Saigon" Vietnam Rescue Sold Sept 09
Fond appreciation for the M151 Breed!!
-
- Brigadier General
- Posts: 2068
- Joined: December 11th, 2007, 2:28 pm
Re: M151A1 in a "TAN" suit.......Got Tan Canvas?
You have to change the cowl brackets to A-2 style....and run a hot wire to ing. switch or a dash breaker......htn
slowest mutt east of the missippi..
-
- Sergeant First Class
- Posts: 238
- Joined: November 26th, 2008, 8:25 pm
- Location: Phoenix, AZ
- Contact:
Re: M151A1 in a "TAN" suit.......Got Tan Canvas?
You can take the brackets off the A1 Windsheild and put them on the A2 windsheild.... That way you will not need to buy anything. I ran into this on the one I am doing now (M151A2). Sometime in US service this had the cowl and windsheild mounts changed to M151, A1, Early A2? I went to put a complete new windsheild on mine... A2 winsheild off (broken glass, holes, etc....) New A2 windsheild on.... Wont fit..... Am I nuts..... A2 off A2 on.... Wasted lots of time on this one.... since the cowl brackets were all ready in place I took the "old style" ones off the bad windshield and put them on the new. Fit just right
43 WLA Harley
44 M24 Chaffee Tank
44 M19 Dual 40mm "Duster"
62 M151
62 M114 ARV
64 M151A1
70 M151A2 Ford Early - USMC
71 M151A2 Ford
74 M151A2 ARMY FAV
75 MC4000 Forklift
77 M151A2 Army CAV
78 M151A2 W/TOW
79 M718A1 USMC
82 M151A2 USMC FAV x2
91& 03 M1030 USMC
96 CUCV II Tahoe
99 M1031B1 USMC
MVPA 7411
M151jeep.com
44 M24 Chaffee Tank
44 M19 Dual 40mm "Duster"
62 M151
62 M114 ARV
64 M151A1
70 M151A2 Ford Early - USMC
71 M151A2 Ford
74 M151A2 ARMY FAV
75 MC4000 Forklift
77 M151A2 Army CAV
78 M151A2 W/TOW
79 M718A1 USMC
82 M151A2 USMC FAV x2
91& 03 M1030 USMC
96 CUCV II Tahoe
99 M1031B1 USMC
MVPA 7411
M151jeep.com
-
- Brigadier General
- Posts: 2086
- Joined: July 20th, 2009, 11:49 pm
- Location: Va. Beach & NC Outer Banks
Re: M151A1 in a "TAN" suit.......Got Tan Canvas?
1976 M151A2 4 Color Cammo Mutt, aquired August 09
1976 or 7? M151A2 "Miss Sandy" Driver, aquired May 2010
Former owner M151A2 "Miss Saigon" Vietnam Rescue Sold Sept 09
Fond appreciation for the M151 Breed!!
1976 or 7? M151A2 "Miss Sandy" Driver, aquired May 2010
Former owner M151A2 "Miss Saigon" Vietnam Rescue Sold Sept 09
Fond appreciation for the M151 Breed!!
-
- Private First Class
- Posts: 20
- Joined: June 11th, 2008, 6:37 pm
- Location: Albuquerque, NM
- Contact:
Re: M151A1 in a "TAN" suit.......Got Tan Canvas?
FIRST .... you guys are VERY VERY OBSERVANT!
ON THE CANVAS - Dave Piezzoferrato says there is no tan canvas only green!! I will check with Beechwood but I think Dave (ODCLOTH) knows what he is talking about. I wanted matching TAN canvas but I may have to settle for green canvas - like my seats.
ON THE WINDSHIELD - Yep, I wanted the electric wipers. Not that I really needed wipers here in Sunny, hot, New Mexico. Heck, I never even take the Mutt out when it's raining or the roads are wet But I know the vacuum wipers suck and when I spoke to Mark Dodd of RAPCO he said just change out the windshield and wiper setup - so I did. this was chepaer than putting new glass n the old A1 frame and buying wiper motors! You need the A2 windshield hinges to do this - the hinges for the A2 are longer than the A1 hinges. And the rubber weatherstrip at the bottom of the windshield is also different - larger, thicker, I think! Anyway - I had the A1 windshield frame without the glass and wanted a glass so it was easier to go to the A2 replacement (complete) rather than have glass cut and installed on the other A1 frame I had. Also, I needed the wiper motors for the A2 so the A2 complete windshield solved the problem....remember you need the A2 hinges they are longer than the A1 hinges.
WIRING - yep, also changed out the harness to the A2 harness with the integral voltage regulator in the alternator. I did this because I wanted the larger generator to run a radio. No problems at all with the swap., Just removed the old outboard regulator and plugged in the new alternator. I got rid of the vacuum deal on the engine and installed the fuel pump...also installed a clear gas filter because I've had rust flakes clogging the carb prior to installing the clear filter.
BTW - had one recurring problem - the float in the carb kept sticking closed! The rubber tip on the needle valve gets stuck in the seat......a little Marvel Mystrey Oil (mixed with the gas) lubed the seat and it doesn't happen any more. A solid brass needle would also solve the problem and one of the guys here in the Roadrunner MV Convoy is tryng that fix - we both had sticking needle valves!
DaninNewMexico
ON THE CANVAS - Dave Piezzoferrato says there is no tan canvas only green!! I will check with Beechwood but I think Dave (ODCLOTH) knows what he is talking about. I wanted matching TAN canvas but I may have to settle for green canvas - like my seats.
ON THE WINDSHIELD - Yep, I wanted the electric wipers. Not that I really needed wipers here in Sunny, hot, New Mexico. Heck, I never even take the Mutt out when it's raining or the roads are wet But I know the vacuum wipers suck and when I spoke to Mark Dodd of RAPCO he said just change out the windshield and wiper setup - so I did. this was chepaer than putting new glass n the old A1 frame and buying wiper motors! You need the A2 windshield hinges to do this - the hinges for the A2 are longer than the A1 hinges. And the rubber weatherstrip at the bottom of the windshield is also different - larger, thicker, I think! Anyway - I had the A1 windshield frame without the glass and wanted a glass so it was easier to go to the A2 replacement (complete) rather than have glass cut and installed on the other A1 frame I had. Also, I needed the wiper motors for the A2 so the A2 complete windshield solved the problem....remember you need the A2 hinges they are longer than the A1 hinges.
WIRING - yep, also changed out the harness to the A2 harness with the integral voltage regulator in the alternator. I did this because I wanted the larger generator to run a radio. No problems at all with the swap., Just removed the old outboard regulator and plugged in the new alternator. I got rid of the vacuum deal on the engine and installed the fuel pump...also installed a clear gas filter because I've had rust flakes clogging the carb prior to installing the clear filter.
BTW - had one recurring problem - the float in the carb kept sticking closed! The rubber tip on the needle valve gets stuck in the seat......a little Marvel Mystrey Oil (mixed with the gas) lubed the seat and it doesn't happen any more. A solid brass needle would also solve the problem and one of the guys here in the Roadrunner MV Convoy is tryng that fix - we both had sticking needle valves!
DaninNewMexico
-
- 2nd Lieutenant
- Posts: 877
- Joined: June 22nd, 2009, 2:29 pm
- Location: Taylorsville, UT
- Contact:
Re: M151A1 in a "TAN" suit.......Got Tan Canvas?
I did some more digging for canvas myself today and found this: http://www.rockywoods.com/Fabrics-Hardw ... y-The-Yard
They have a color they call British Tan. The stuff is not treated but I've also found Canvak
They have a color they call British Tan. The stuff is not treated but I've also found Canvak
1968 M151A1
1967 M416
1967 M416
-
- Private First Class
- Posts: 20
- Joined: June 11th, 2008, 6:37 pm
- Location: Albuquerque, NM
- Contact:
Re: M151A1 in a "TAN" suit.......Got Tan Canvas?
FANTASTIC! Don't know why I never saw that on the web....but going to see if Dave can make my top from it! thanks!
-
- 2nd Lieutenant
- Posts: 877
- Joined: June 22nd, 2009, 2:29 pm
- Location: Taylorsville, UT
- Contact:
Re: M151A1 in a "TAN" suit.......Got Tan Canvas?
I can't believe that I didn't find it before with as many hours as I have spent searching online for canvas. If you or anyone else following this is interested in other options, I also found this: http://www.ahh.biz/products/Dyed_cotton ... FDC010.htm. They charge more for lighter fabric but it is another option.
1968 M151A1
1967 M416
1967 M416
Re: M151A1 in a "TAN" suit.......Got Tan Canvas?
You have a Desert pattern A1 with A2 windshield....... It is positively been used in national trainig center in the 80's ,It is plausible dough that some A1 saw use in later days I doubt! if you consider so you'll have to buy regular green top.... there is option to get the vinil Tan (produced in the late 90's) top made for Desert applications ( I know that TNJ Murray carries NOS sides and curtain.... I have seen in germany M151A1's with vinil tops back in the 90's just off US army DRMO they also Had a composite lights instead mounted with an elaborated Kit called European conversion
were you had templates,wiring , side signals and reflectors like late A2 's so maibeeeee..........
hope it helps if anybody knows about vinil desert tops for sale I may be interested too
were you had templates,wiring , side signals and reflectors like late A2 's so maibeeeee..........
hope it helps if anybody knows about vinil desert tops for sale I may be interested too
Re: M151A1 in a "TAN" suit.......Got Tan Canvas?
GIBBO, You do realize that this post is a year old?
Rick
Rick
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
Re: M151A1 in a "TAN" suit.......Got Tan Canvas?
um....try two years Rick...lolrickf wrote:GIBBO, You do realize that this post is a year old?
Rick
Jim
Zigzag50, Northeast51, KC2QDZ
MVPA # 30032 G838.org
--------------------------------------
1971 G838-M151A2 1966 G857-M416
1968 G748-M101A1 1976 G748-M116A1
1990 MEP-701A
--------------------------------------
Real jeeps have horizontal grille slots
MVPA # 30032 G838.org
--------------------------------------
1971 G838-M151A2 1966 G857-M416
1968 G748-M101A1 1976 G748-M116A1
1990 MEP-701A
--------------------------------------
Real jeeps have horizontal grille slots
-
- Private First Class
- Posts: 20
- Joined: June 11th, 2008, 6:37 pm
- Location: Albuquerque, NM
- Contact:
Re: M151A1 in a "TAN" suit.......Got Tan Canvas?
1. MY windshield to cowl rubber was crap so the only rubber NOS I could find was A2...so I changed the brackets and sued the A2 rubber. A2 windshields are more available NOS too!
2. wanted decent wiper and just used the A2 harness...worked fine.
3. TAN canvas (vinyl) now available from Army Jeep Parts.....not cheap but looks great....doors available too.
4. I am also corrected that the looped wheel hubs are USMC and not Army.....
5. TAN because in the sunny southwest if you have a green M151 the sun will heat it up enough to burn you by 1:00 p.m.... TAN ones were in the Suez areain 60s and 70s so TAN is an OK though not common color.
2. wanted decent wiper and just used the A2 harness...worked fine.
3. TAN canvas (vinyl) now available from Army Jeep Parts.....not cheap but looks great....doors available too.
4. I am also corrected that the looped wheel hubs are USMC and not Army.....
5. TAN because in the sunny southwest if you have a green M151 the sun will heat it up enough to burn you by 1:00 p.m.... TAN ones were in the Suez areain 60s and 70s so TAN is an OK though not common color.