N.O.S Brake Drums
Moderators: rickf, raymond, Mr. Recovery
-
- Sergeant First Class
- Posts: 242
- Joined: December 8th, 2007, 11:29 am
- Location: Allentown, PA
N.O.S Brake Drums
I have 1988 dated brake drums, my question is what is the RED primer/coating that is coating them made of and how do you remove it, nothing I've tried fazes it, DOT 3, Oven Cleaner any suggestions...
Thanks, Scott O&O
W3SLC
Thanks, Scott O&O
W3SLC
Re: N.O.S Brake Drums
First thing that pops in my mind is red oxide but the second is if it holds on that well, why would you want to remove it?
1960 M151 Run #1
"There is one nut on a M151 that is very difficult to remove....." - K8icu
"She ain't a Cadillac and she ain't a Rolls, But there ain't nothin' wrong with the radio" - Aaron Tippin
"There is one nut on a M151 that is very difficult to remove....." - K8icu
"She ain't a Cadillac and she ain't a Rolls, But there ain't nothin' wrong with the radio" - Aaron Tippin
-
- Sergeant First Class
- Posts: 242
- Joined: December 8th, 2007, 11:29 am
- Location: Allentown, PA
Re: N.O.S Brake Drums
I should of mention that it is coating the whole drum the inside too, that is the only part of it that I want to remove I dont think it would be of any good for the brake shoes...
Re: N.O.S Brake Drums
Likely as not that is preservative and also, likely as not, they should be turned just to ensure they're true. The slightest turn will take that coating off and you're good to go with perfectly true drums..
Re: N.O.S Brake Drums
I agree, I have never seen new drums for anything that were actually round. Finding a place to cut drums is getting harder and harder. Or at least finding someone that actually knows how to do it correctly. And by the way, that red oxide will have lead in it so if you decide to take a whiz wheel to it be sure to wear a respirator and shower well afterwards.
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
-
- Sergeant First Class
- Posts: 242
- Joined: December 8th, 2007, 11:29 am
- Location: Allentown, PA
Re: N.O.S Brake Drums
Well I called around to find a shop that would turn the drums and as Rick said it would be a hard find, I finally called an machine shop that we would use years ago he said he would do them but he was leaving on vacation so I have to wait a week, but I did find something that took it off, I used a 3M nylon wheel that I had... Scott O&O
Re: N.O.S Brake Drums
Don't know if this is happening everywhere but our local O'Reillys turns drums and its a rather new store.
- gcbennet
- Private First Class
- Posts: 22
- Joined: January 18th, 2018, 11:42 am
- Location: Trenton, ON CANADA
Re: N.O.S Brake Drums
Some auto dealerships still do it. After a ton of searching I found a local Ford dealership still had the machine and someone who actually knows how to use it so they did mine. Cost me $40 a pair.
Gordon Bennett
1985 M998 HMMWV
1986 Bombardier Iltis
1977 M151A2
1985 M998 HMMWV
1986 Bombardier Iltis
1977 M151A2