Engine Build

hondo100 · Unread post by **hondo100** » August 14th, 2023, 1:26 pm

Just got the engine and head back from the machine shop. Here's the head. I should have taken a "before" picture as the difference is incredible. Now everything is being triple cleaned and painted.

Unread post by **rickf** » August 14th, 2023, 6:43 pm

Are those valve springs on the right valves? It appears the rotators are on the intakes.

svramselaar · Unread post by **svramselaar** » August 15th, 2023, 8:42 am

hi

from the left side thirth valve are there two locks or one ???
the top plate`s are at the right valve`s

george

Unread post by **rickf** » August 15th, 2023, 9:41 am

There are two keepers, I saw that also. One is shiny and one is black. And yes, the valve caps are correct, for some reason I was thinking the raised caps were the rotators.

hondo100 · Unread post by **hondo100** » August 15th, 2023, 9:55 am

Had me scrambling there for a minute.

m38inmaine · Unread post by **m38inmaine** » August 15th, 2023, 8:22 pm

Looks good.

Engine Build

Engine Build

Re: Engine Build

Re: Engine Build

Re: Engine Build

Re: Engine Build

Re: Engine Build