TM 9-2320-218-20-1-1

ODRotorHead · Unread post by **ODRotorHead** » January 24th, 2024, 4:08 pm

Hi.

If anyone has a clean, military issue copy of TM 9-2320-218-20-1-1 (MAY 1982) you're willing to sell, please let me know. The reprints and .pdf copies are too dull and blurry for my needs.

Thanks very much.

Mark

199th mp · Unread post by **199th mp** » January 24th, 2024, 5:46 pm

send a message to ken the muttguru. if anyone has a spare, it would be him, i think.

Unread post by **rickf** » January 24th, 2024, 9:09 pm

I know I have them and they my be the ones I have that are still in plastic wrap. But if I sell them I want to sell the set of two. The 1-1 and 1-2. I will look in the morning to see which ones I have.

ODRotorHead · Unread post by **ODRotorHead** » January 25th, 2024, 9:14 am

Thanks Rick.

If they're the may 82 versions (or later), let me know the price when you can. I can pass my current -20-1-2 along to someone else who needs it.

I don't know the dates on the -34P, but I'm looking for the most current copy of that manual too.

Thanks again.

Mark

Unread post by **rickf** » January 25th, 2024, 9:52 am

The latest -34P is 1988. Portrayal Press has it.

https://www.portrayalpress.com/product- ... 34p-88.htm

ODRotorHead · Unread post by **ODRotorHead** » February 28th, 2024, 3:24 am

My arrangement with Rick didn't work out, so . . .

If anyone has a clean, original military issue copy of TM 9-2320-218-20-1-1 (May 1982 or later) you're willing to sell, please let me know.
The reprints and .pdf copies are too dull and blurry for my needs.

I'm also looking for -
TM 9-2320-218-34-1 (August 1982 or later)
TM 9-2320-218-34P (November 1988)
LO 9-2320-218-12 (July 1988)

Thanks very much.

Mark

Unread post by **rickf** » February 28th, 2024, 10:21 am

Let me point out that it did not work out because what I thought was a complete set turned out to be two NOS copies of the 20-1-2. So, if anyone needs a new, in the plastic copy of the 20-1-2 I have a couple.

muttguru · Unread post by **muttguru** » February 29th, 2024, 10:26 am

ODRotorHead wrote: ↑
January 24th, 2024, 4:08 pm
Hi.

If anyone has a clean, military issue copy of TM 9-2320-218-20-1-1 (MAY 1982) you're willing to sell, please let me know. The reprints and .pdf copies are too dull and blurry for my needs.
Thanks very much.
Mark

Hello Mark,I have the 20-1 and the 20-2 but these are .PDF copies. They originally appeared on the US Military website and were high-quality copies.
Unfortunately, my provider (AOL) limits the upload to no more than 5 lots totalling 25 Mb at any one time and as the TMs are high-quality, the size exceeds the maximum that AOL allows.
I can put them onto a CD but then there's postal costs to get them to you from me, here in the UK. It will probably work out cheaper to get the TMs from Portrayal.

At one time, around the early '90's, the Mil put these TMs and their updates onto their download site and they actually had PIN Numbers allocated to some of those late-issue TMs.

I still have the PIN Number for the 20-1-2 manual and the 34-1 but I haven't used it since the initial download i received. I doubt if those TMs are still available for download but it may be worth a try.

TM9-2320-218-20-1-2 PIN No. 051002-000
TM9-2320-218-34-1 PIN No. 051333002

Ken

Unread post by **rickf** » February 29th, 2024, 11:14 am

Ken, Do you have a link for the Mil site?

Horst · Unread post by **Horst** » February 29th, 2024, 11:40 am

Ken,

You could always use a free cloud service like the free version of Dropbox. You would upload it and then just send an email link to the receiver.
This way you would be not limited by the maximum email size.

Unread post by **rickf** » February 29th, 2024, 12:00 pm

Free is usually not "Free" anymore. There are always strings attached and the other end of those strings is usually attached to a ton of spam and junk mail. I don't know about Dropbox, I have been unsuccessful in every try at using it.

Horst · Unread post by **Horst** » February 29th, 2024, 12:24 pm

I am using Dropbox pretty much every day, albeit a paid version.

Another possibility is using Google drive, everyone using any other Google service should have it already as a short cut in the Crome browser. It is for free and does not come with any more spam or junk. If you are using Google or their browser you already opened yourself

m3a1 · Unread post by **m3a1** » February 29th, 2024, 12:26 pm

There are a few on eBay (not mine) that claim and/or have the appearance of originals but the prices begin at $129 and go up from there.

Unread post by **rickf** » February 29th, 2024, 12:30 pm

I know Mark is looking for ORIGINAL versions of the manuals to get very crisp wiring diagrams for his reprints he is making. I am still waiting for him to post them on a separate thread so they are all together. His reprints are EXCELLENT quality and put the originals to shame but he needs the perfect originals as a base to start with.

199th mp · Unread post by **199th mp** » February 29th, 2024, 12:31 pm

disappointing for me to see this, now. i had 5 original M151 books for parts and service, and i lost my shirt trying to sell them. driver manual, -20 and 34 for service and -20 and 34 for parts. in the end, i sold the whole pile for only $55. nobody wanted them, and they were all in good condition.

TM 9-2320-218-20-1-1

TM 9-2320-218-20-1-1

Re: TM 9-2320-218-20-1-1

Re: TM 9-2320-218-20-1-1

Re: TM 9-2320-218-20-1-1

Re: TM 9-2320-218-20-1-1

Re: TM 9-2320-218-20-1-1

Re: TM 9-2320-218-20-1-1

Re: TM 9-2320-218-20-1-1

Re: TM 9-2320-218-20-1-1

Re: TM 9-2320-218-20-1-1

Re: TM 9-2320-218-20-1-1

Re: TM 9-2320-218-20-1-1

Re: TM 9-2320-218-20-1-1

Re: TM 9-2320-218-20-1-1

Re: TM 9-2320-218-20-1-1