45 Degree Fuel Inlet for Zenith Carb.

fowlercal · Unread post by **fowlercal** » November 24th, 2009, 3:10 am

Does anyone know where to get a 45 degree fuel inlet elbow and locknut for the Zenith carb on the M151A2? I haven't seen them anywhere, and the 34-P only lists the 90 degree fitting.

Unread post by **rickf** » November 24th, 2009, 8:20 am

I think that is actually a 30 degree fitting but I know the one you are talking about. I will dig through my stuff this week end but I don't think I have any spares.

Rick

70mford151a2 · Unread post by **70mford151a2** » November 24th, 2009, 9:00 am

Like Rick I will look if I have (2) extras you can have 1 of them, I like to have at least 1 extra of everything as in some things

as you know are hard to find and whatever you do don't replace with a steel one could crack the carb, that I learned on this site.

have you checked auto part supply houses. ?

Unread post by **rickf** » November 24th, 2009, 10:00 am

You will not find that fitting in a parts house. It has a straight thread for the carburetor with a lock nut, that is the odd part of it.

Rick

Unread post by **rickf** » November 24th, 2009, 10:29 am

You will not find that fitting in a parts house. It has a straight thread for the carburetor with a lock nut, that is the odd part of it.

Rick

Unread post by **rickf** » November 24th, 2009, 10:30 am

Sorry for the duplicate posts today, I get called away and forget that I already posted it.

Rick

TrueXena · Unread post by **TrueXena** » November 24th, 2009, 11:00 am

I thought maybe all the double posts was cuz you where closing in on a new rank or something.

(I have nothing of value to put to the REAL topic of this post, carry on!)

moose53 · Unread post by **moose53** » November 25th, 2009, 3:54 am

Old people just tend to repeat themselves a lot ....

Jim

Unread post by **rickf** » November 25th, 2009, 8:16 am

HUH, WHAT?

Rick

Ralph Fuller · Unread post by **Ralph Fuller** » November 25th, 2009, 11:44 am

Did someone call me? Did someone call me? Oh, sorry

fowlercal · Unread post by **fowlercal** » February 17th, 2010, 12:39 pm

Follow-up to Fuel Inlet Elbow. I found the 30 degree fuel inlet elbow for the carb at TNJ Murray if anybody else is looking for them. They have them for $15.00 NOS including the locknut.

Ralph Fuller · Unread post by **Ralph Fuller** » February 17th, 2010, 1:06 pm

Thanks for the follow up.

45 Degree Fuel Inlet for Zenith Carb.

45 Degree Fuel Inlet for Zenith Carb.

Re: 45 Degree Fuel Inlet for Zenith Carb.

Re: 45 Degree Fuel Inlet for Zenith Carb.

Re: 45 Degree Fuel Inlet for Zenith Carb.

Re: 45 Degree Fuel Inlet for Zenith Carb.

Re: 45 Degree Fuel Inlet for Zenith Carb.

Re: 45 Degree Fuel Inlet for Zenith Carb.

Re: 45 Degree Fuel Inlet for Zenith Carb.

Re: 45 Degree Fuel Inlet for Zenith Carb.

Re: 45 Degree Fuel Inlet for Zenith Carb.

Re: 45 Degree Fuel Inlet for Zenith Carb.

Re: 45 Degree Fuel Inlet for Zenith Carb.