416 A1 Plate
Moderators: rickf, raymond, Mr. Recovery
- Muttland
- Staff Sergeant
- Posts: 136
- Joined: October 9th, 2008, 9:41 am
- Location: El Pinar, Canelones, Uruguay, South America
416 A1 Plate
I´m looking for a correct plate or a good reproduction of the M416-A1 trailer with inertial brakes in it.
It is hard to fine for me. Y bought for my M416 trailer the correspondig Plate in the past, but for the M416-A1 where can I find one???
Enrique
It is hard to fine for me. Y bought for my M416 trailer the correspondig Plate in the past, but for the M416-A1 where can I find one???
Enrique
M151-A1 1966 M416 1966
Re: 416 A1 Plate
Qique: Does it have to be a plate for the 416A1. I'm not sure if anyone can tell the diference. Maybe a blank plate, I'll keep looking.
Floyd
Floyd
1961 M151
1967 M416
1988 M35A2C
VFW Life Member
NRA Life Member
1967 M416
1988 M35A2C
VFW Life Member
NRA Life Member
-
- Sergeant First Class
- Posts: 242
- Joined: December 8th, 2007, 11:29 am
- Location: Allentown, PA
Re: 416 A1 Plate
the M416A1 data plates that Ive seen all had M416 WITH SERVICE BRAKE after the M416 there was a stamped or scribed A1 Ill get a pic up soon they were made at PARKHURST and the ones Ive seen were all for the Air Force you can tell that by the Veh. ID # it will start with 78K-##-#### never saw one that was any other date so if anyone has one with a different ID# let me know the contract NO. should be DAAE07-76-C-0### the last three nombers are gone on my data plate so if anyone can give me them Id be much ablidged and they were painted Flat Forest Green from the factory. Scott out
- Muttland
- Staff Sergeant
- Posts: 136
- Joined: October 9th, 2008, 9:41 am
- Location: El Pinar, Canelones, Uruguay, South America
Re: 416 A1 Plate
The correct name is M416 whith service brake, Thanks miljeep
I found a pic of the correct plate and it show the name,. This is the plate that I`m looking for.
I found a pic of the correct plate and it show the name,. This is the plate that I`m looking for.
M151-A1 1966 M416 1966
Re: 416 A1 Plate
there ya go Scott, the last four on the contract number are 0284....
Jim
Jim
Zigzag50, Northeast51, KC2QDZ
MVPA # 30032 G838.org
--------------------------------------
1971 G838-M151A2 1966 G857-M416
1968 G748-M101A1 1976 G748-M116A1
1990 MEP-701A
--------------------------------------
Real jeeps have horizontal grille slots
MVPA # 30032 G838.org
--------------------------------------
1971 G838-M151A2 1966 G857-M416
1968 G748-M101A1 1976 G748-M116A1
1990 MEP-701A
--------------------------------------
Real jeeps have horizontal grille slots
- Muttland
- Staff Sergeant
- Posts: 136
- Joined: October 9th, 2008, 9:41 am
- Location: El Pinar, Canelones, Uruguay, South America
Re: 416 A1 Plate
M151-A1 1966 M416 1966
-
- Master Sergeant
- Posts: 399
- Joined: March 9th, 2008, 8:05 pm
Re: 416 A1 Plate
Did these ever get done???
I am looking for the data plate that is on the frame!!!
I am looking for the data plate that is on the frame!!!
Jeff
Army Transportation Assoc Vietnam, Associate Member
Vietnam Veterans Assoc, Associate Member
Green Mountain Military Vehicle Club
1968 M52A2
1968 M54A2
1968 M151A1
1964 M151A1
1953 M62
1951 M37
" I am deuceless" Sold them all.
Army Transportation Assoc Vietnam, Associate Member
Vietnam Veterans Assoc, Associate Member
Green Mountain Military Vehicle Club
1968 M52A2
1968 M54A2
1968 M151A1
1964 M151A1
1953 M62
1951 M37
" I am deuceless" Sold them all.
Re: 416 A1 Plate
Have any of these been made?? I would LOVE to have two of them!
Re: 416 A1 Plate
Thanks to Muttland! He has given me his M416A1 PDF image file and I found someone to produce the data plate.
It's going to cost me $60 for them to format the image and each plate is approximately $10.00. If anyone wants one, I can order them and average out the cost to all of the plates.
The company said that it will not be an "exact" replica but it will be close. I gave them all the dimensions. Begger can't be choosers, so I am going for it.
Please PM me (include your email address) if you want one. Once get the final order number, I will PM you back the cost and you can send me the funds. I promised Muttland that I won't make this a commercial thing, so I'm not making any profit from it.
Please PM me (include your email address) before March 31st.
Thanks! James
It's going to cost me $60 for them to format the image and each plate is approximately $10.00. If anyone wants one, I can order them and average out the cost to all of the plates.
The company said that it will not be an "exact" replica but it will be close. I gave them all the dimensions. Begger can't be choosers, so I am going for it.
Please PM me (include your email address) if you want one. Once get the final order number, I will PM you back the cost and you can send me the funds. I promised Muttland that I won't make this a commercial thing, so I'm not making any profit from it.
Please PM me (include your email address) before March 31st.
Thanks! James
Re: 416 A1 Plate
Ok, last call on these data plates. I'm heading out for 2 weeks on a business trip. I need to get final numbers to place an order. Please PM me asap!