Clutch Staying engaged

This is the place to get help with technical matters concerning your M151 jeep

Moderators: rickf, raymond, Mr. Recovery

Post Reply
Merc
civilian
Posts: 8
Joined: May 11th, 2010, 4:50 pm

Re: Clutch Staying engaged

Unread post by Merc » September 29th, 2010, 10:58 pm

OK, sounds like a few more things to try. I will look into it and let you know. Thanks again for all the responses!
Top
Merc
civilian
Posts: 8
Joined: May 11th, 2010, 4:50 pm

Re: Clutch Staying engaged

Unread post by Merc » November 18th, 2010, 3:08 pm

I gave up and took it to a repair shop. They have looked at it and tell me it is seized and rusted out. Not surprising. It looked really bad in there. Anyone know where to buy a another tranny at a decent price?
Top
User avatar
Rainman
Brigadier General
Brigadier General
Posts: 2398
Joined: November 28th, 2007, 12:32 am

Re: Clutch Staying engaged

Unread post by Rainman » November 18th, 2010, 11:37 pm

I picked up a couple of gov't rebuilds at Antelope Valley last year.
http://www.avettruck.com/Featured_Produ ... ducts.html
They are in California, so the shipping to Ohio was a little rough via UPS.
Rainman
M151 World Land Speed Record Holder
Top
bazookajoe
Sergeant First Class
Sergeant First Class
Posts: 267
Joined: January 8th, 2011, 9:03 pm

Re: Clutch Staying engaged

Unread post by bazookajoe » January 9th, 2011, 1:14 am

Had a friend with a stuck clutch disc ...just remove the bottom bell housing cover and pry the disc off of the pressure plate this was his problem and it solved it....good luck
Top
User avatar
Jay Mallari
1st Lieutenant
1st Lieutenant
Posts: 931
Joined: December 7th, 2007, 10:30 pm
Location: Middlesex, England

Re: Clutch Staying engaged

Unread post by Jay Mallari » January 9th, 2011, 2:16 pm

Hi Bazookajoe. Glad to see you posting on g838 :)

Jay
Top
Post Reply

Return to “Technical Discussion”