Jerry can mount
Moderators: rickf, raymond, Mr. Recovery
Jerry can mount
I just mounted the straps for jerry can and they are too small for the can to go in them. What goes on here? were cans smaller for M151?. I don't think I am putting them on wrong. I just took loop off the jeep put through loop in strap and put back on, same in all 3 places. I have 3 straps 1 NOS and 2 used ones. They are all the same size. One has a little larger ring and the strap loops are riveted instead sowed.
Re: Jerry can mount
Could you post a picture? A picture with the can and strap would be nice.
Re: Jerry can mount
Are you using a standard US metal fuel can?
-
- Colonel
- Posts: 1654
- Joined: November 26th, 2007, 7:44 am
- Location: ~Heaven~
Re: Jerry can mount
This is the way I mounted mine
Ralph
1967 M151A1
1967 M151A1
1967 M416
1947 Bantam TC-3 trailer
If The Phone Don't Ring ... You'll Know It's Me
Airborne Ranger CIB Vietnam
1967 M151A1
1967 M151A1
1967 M416
1947 Bantam TC-3 trailer
If The Phone Don't Ring ... You'll Know It's Me
Airborne Ranger CIB Vietnam
Re: Jerry can mount
You can see where I cut the strap and riveted it back into a much smaller loop which made it longer by 2". All three straps were the same size.