CMD Body Panels

Eddie Holland · Unread post by **Eddie Holland** » October 4th, 2013, 8:47 am

i believe the instructions to installing the ROPS show to cut the notch in the lid.

Unread post by **rickf** » October 4th, 2013, 9:41 am

Eddie Holland wrote:i believe the instructions to installing the ROPS show to cut the notch in the lid.

They do but I did not use the ROPS brackets. I used a kit for a deuce.

lpcoating · Unread post by **lpcoating** » October 5th, 2013, 7:58 pm

The rear fender tops will be listed on e-bay this weekend. Same deal as the tool box lids - if a member wants a set contact me through this site or e-mail me at work: gloomis@camfab.com and you will save some money. I have (3) sets at this time and will hold the show price of $180 plus S & H to members.

Guy

lpcoating · Unread post by **lpcoating** » October 6th, 2013, 8:38 am

I need some help. Can someone get me pictures of an A2 front floor pan (both sides)? I would also need dimensions of the floor drain with up close pictures of the drain. I've been told that there are several different styles of drains. I have the info from when I re-made my A1 pan and I think (someone correct me if I'm wrong) that the stiffener ribs are the same from the A1 and A2. I made my floor all one piece but the info is there. All I have to do is seam it like the original and use the correct rib tool and there will be some more replacement panels for people. Please include the year of A2 for my records. Thank you.

Guy

moose53 · Unread post by **moose53** » October 6th, 2013, 10:08 am

70 -71 Ford A2 had floor drains, 72-78 AMG had drains in the side panels

Jim

lpcoating · Unread post by **lpcoating** » October 6th, 2013, 10:13 am

moose53 wrote:70 -71 Ford A2 had floor drains, 72-78 AMG had drains in the side panels

Jim

This is a start. Now I need pictures!

Unread post by **rickf** » October 7th, 2013, 9:43 am

The eighties crush I have has both floor drains and side drains. Don't all of the A2's have floor drains plus side drains with the exception of the earlies that just had the floor drains alone?

halftracknut · Unread post by **halftracknut** » October 7th, 2013, 7:13 pm

My 1972 Ford has just the floor drain...

lpcoating · Unread post by **lpcoating** » October 14th, 2013, 9:39 pm

I started working on the front floor pans tonight for the A1. Can someone please send me some pictures of an A2 floor? 2nd request! Or maybe none of them need to be replaced?

Fil Bonica · Unread post by **Fil Bonica** » October 14th, 2013, 9:46 pm

Give me an email and will send immediately.

Fil bonica

lpcoating · Unread post by **lpcoating** » October 14th, 2013, 9:52 pm

Fil Bonica wrote:Give me an email and will send immediately.

Fil bonica

Unread post by **rickf** » October 15th, 2013, 6:44 am

I should have a set of NOS A2 side panels arriving tomorrow so I will have to make arrangements to get them up to you for scanning.

Francis Marion · Unread post by **Francis Marion** » October 15th, 2013, 1:14 pm

lpcoating wrote:
Fil Bonica wrote:Give me an email and will send immediately.

Fil bonica

gloomis at camfab dot com

Time for a little side bar.

I cringe every time I see someone post their email address on a web forum. If you take a look at the bottom of this page will will see the following line (only differing by who has recently visited the forum:

Registered users: Francis Marion, Google [Bot], Hambone, Majestic-12 [Bot]

Half the recent users are spiders that continually search the web for key words. Spammers use these search engines to find email addresses using the symbols and email formats commonly used then fill your in box with unsolicited mail and sell your address to others who will do the same

I would recommend that you edit your post so the email reflects the format I used or just send your email address by PM which cannot be scanned or searched.

P.S. Please keep me informed on the status of your floor panels. I will once again order from you as soon as you have passenger and rear floor panels available. Any chance a tool box floor will be made?

Hambone · Unread post by **Hambone** » October 15th, 2013, 2:06 pm

I will need a set of A1 front floor panels also.

Fil Bonica · Unread post by **Fil Bonica** » October 15th, 2013, 4:16 pm

The body is a 79 or 80
AMG replacement .

Fil bonica

CMD Body Panels

Re: CMD Body Panels

Re: CMD Body Panels

Re: CMD Body Panels

Re: CMD Body Panels

Re: CMD Body Panels

Re: CMD Body Panels

Re: CMD Body Panels

Re: CMD Body Panels

Re: CMD Body Panels

Re: CMD Body Panels

Re: CMD Body Panels

Re: CMD Body Panels

Re: CMD Body Panels

Re: CMD Body Panels

Re: CMD Body Panels